Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: gts rim masking and painting

  1. #1
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385

    gts rim masking and painting

    i have a couple of sets of gts rims hangin around for my own use so i figured i would get them sandblasted and paint them up..i have one set of 14x7 and one set of 15x7 which i am mixing to use 14x7 on front and 15x7 on rear...the first set i have painted is in the traditional grey centre silver outer but the second set i will be doing in reverse colours for something different..
    firstly before i get into descriptions of masking etc lets look at what this is costing me..
    the 15 inch rims ive had for 10 years and they cost me then $100 each..
    the 14x7 rims i bought recently and paid $100 each..
    so $800 for 8 rims..
    sandblasting was $15 a rim...$120.
    i bought 4 litres of gts silver and 4 litres of gts grey which was $350 for the 8 litres,a bit more than needed to do 8 rims but its always good to have to much than not enough..
    fineline tape 3 rolls $30..again extra tape for later..
    time taken too prime/hifill and rub down ready for paint and then paint silver 4 hours..
    time taken to mask up centres and paint about 2.5 hours..
    the process for painting gts rims is quite simple as long as you are a patient person..
    sandblast or rub down,primer/hifill..then rub down nice and smooth..then paint the whole rim in the silver and let the paint cure a bit before using the fineline tape to mask out your insert..then use masking tape to fill in the areas you dont want to be painted the dark grey..use a razor on the tape to cut the masking tape..mask up the rest of the rim and paint in the darker colour and then demask...the use of fineline tape gives you a nice sharp edge on the colour and also does not allow the paint to stick to it so when you demask the paint stays on the wheel on not on the tape..



















    Last edited by Alien DNA; 01-06-2018 at 12:27 PM.

  2. #2
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    so these rims will be on the sinbox later this week....

    Last edited by Alien DNA; 01-06-2018 at 12:25 PM.

  3. #3
    Forum Mum jennie285's Avatar
    Join Date
    Apr 2010
    Location
    Parkes Central West NSW
    Posts
    2,464
    Gees they look good Oz....lovely job
    HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
    HZ Madeira Red Windowless sandman now Sold to Bigrob
    HX Mandarin Red Sandman Ute finished, and club registered
    1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
    Married to RodneyHZ253

  4. #4
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    thanks jennie....just goes to show that im not just a pretty face....

  5. #5
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    When will we see the ones done in the reverse colour??

  6. #6
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    Quote Originally Posted by agr071 View Post
    When will we see the ones done in the reverse colour??
    i will be painting the dark grey during the week and then its when the mood and the sun gets me to do the mask up and silver the spokes...the ones above took me a month coz of weather etc...

  7. #7
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Maybe IF you stopped talking for a while and got some work done, it wouldn't take so long....
    Then again you always are quiet!

  8. #8
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  9. #9
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385






    14x7 fronts with 215x65 and 15x7 rear with 225x60..just the look i was after...
    Last edited by Alien DNA; 01-06-2018 at 12:26 PM.

  10. #10
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Its going to look good when its finished Greg! That custom front looks good and the wheels are just right. Funny how 10 years ago everyone pulled the gts wheels off and put them on the trailer and went for simmons or dragways or those bloody awful billet style things.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Hq I'd tag painting
    By r0bb0 in forum Holden Sandman Q&A
    Replies: 18
    Last Post: 05-03-2015, 07:30 AM
  2. painting help on parts ect
    By ehbits in forum Paint & Panel
    Replies: 2
    Last Post: 28-05-2014, 09:26 PM
  3. painting plastic
    By thatotherguy in forum Paint & Panel
    Replies: 3
    Last Post: 10-06-2013, 12:11 AM
  4. ID tag painting
    By adam perth in forum Paint & Panel
    Replies: 7
    Last Post: 15-10-2011, 08:23 AM
  5. Painting - novice
    By wayne g in forum The Lounge
    Replies: 18
    Last Post: 04-04-2010, 11:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •