Results 1 to 9 of 9

Thread: HZ hazard switch

  1. #1
    P Plater
    Join Date
    Oct 2016
    Location
    Avenel
    Posts
    31

    HZ hazard switch

    HI
    Did HZ have hazard switch on the steering column , I'am thinking not but my son has a 10- 78 HZ 1 toner with hazard switch on the column and what appears to be a WB brake master cylinder. The car has matching numbers on body & chassis and doesn't appear to have been in a bad crash. I just find it strange that someone would change out a steering column.
    Cheers Len

  2. #2
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    78 would not have had factory hazard lights/switch. I think Hazards came in around late 79, or 80. Probably the column is out of a WB.
    Check where the windscreen washer squirters are, you may have a WB cab. Also, if it's a got a WB m/c it would be a WB booster, which is different from HZ
    Cheers
    Max

  3. #3
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    The October 1980 Holden HZ Parts Manual (last parts manual for HZ) has no listing for the Hazard switch.
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

  4. #4
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Quote Originally Posted by Innuendo View Post
    The October 1980 Holden HZ Parts Manual (last parts manual for HZ) has no listing for the Hazard switch.
    That clears it up, must be a WB column, (or part of one)

  5. #5
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    It is something I would have 100% done back in the day. Always upgrading where you could at little expense.
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

  6. #6
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Are they wired up?

  7. #7
    P Plater
    Join Date
    Oct 2016
    Location
    Avenel
    Posts
    31
    Yes Max just checked and it has WB washer jets, so I would say your right it's a WB cab.
    Cheers
    Len

    - - - Updated - - -

    I don't know if they work, it has no battery or motor, I stole the 253 out of it to use in my panel van.
    Cheers
    Len

  8. #8
    Cruiser
    Join Date
    Sep 2013
    Location
    Eastwood, NSW
    Posts
    366
    It could be an HZ chassis with a WB cab fitted. If all the plates were transferred, then all of the numbers would still match !

    There are many small differences between WB & HZ, much of it to do with wiring.

    Does the plug at the base of the column match the blinker switch wiring ?

    Where the ignition coil wiring is at the firewall, is the coil wire a skinny yellow one or a thick pink one ?

    Dr Terry.

  9. #9
    P Plater
    Join Date
    Oct 2016
    Location
    Avenel
    Posts
    31
    Hi Dr Terry Yes the blinker plug matches the base plug and it's a small one not a wide one like on the early models so I am sure now it's a WB cab, but that's OK it;s just interesting what you find when you look at the small detail. I tried to post a picture but it wouldn't upload.
    Cheers
    Len

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •