Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: HZ Horn Centre fixing kit.

  1. #1
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139

    HZ Horn Centre fixing kit.

    Would anyone have a picture (or better still have one for sale) of the HZ horn centre fixing kit. I have the horn pad but only half of the plastic fixing ring that attaches the horn pad to the steering wheel horn boss. I have checked eBay and various reproduction stores without luck. I was going to look into getting one 3D printed, any help appreciated. Cheers
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  2. #2
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    You're talking about the white plastic part that the horn cap slips over?
    Under that is the alloy part, same shape, that the horn contacts & the 4 springs mount on. Do you have all that?

  3. #3
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624

  4. #4
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    I have the complete horn setup except the white plastic retainer that the HZ horn pad slips over. I have half of it and if I can't source one I was going to look into having on 3D printed.
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  5. #5
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Thanks for your reply, This is the set up I have. It seems to differ from the set up you have show. CheersHorn.jpg HornA.jpg
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  6. #6
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Quote Originally Posted by maxsandman View Post
    Worth a try, would you like to sell one of these?
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  7. #7
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.

  8. #8
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Quote Originally Posted by wbute View Post
    They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.
    I have seen plenty of Q to X caps and fittings but haven't been able to find anything for the Z's as yet. I will be able to make what have work but just trying to see if anything was out there, Cheers
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  9. #9
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Quote Originally Posted by wbute View Post
    They are two different caps. One is the earlier one with the Allen screws. Yours is the later HZ one that has no screws. You need the insert that suits and you should be able to get it from rare spares. They make a complete steering wheel anc I am sure they do the caps separately.
    Oops, I forgot about HZ having the different cap, I always remember those caps on UC torana & SL/E statesmans

    Quote Originally Posted by HZSanFan View Post
    Worth a try, would you like to sell one of these?
    Sorry, not selling any gear til I finish some projects. But I will keep you in mind..... If it was me, I'd be using the Allen key headed horn cap, IMHO they look way better! The rare spares early ones look identical.
    Then keeping an eye out for an original while you drive your HZ

  10. #10
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •