Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: HZ Horn Centre fixing kit.

  1. #11
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Thanks, that is exactly what I am after, Cheers
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  2. #12
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Hey HZSanFan, if you end up getting this part made, I could sell one for you.

  3. #13
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Quote Originally Posted by maxsandman View Post
    Hey HZSanFan, if you end up getting this part made, I could sell one for you.
    I have a 3D printer lined up so I will see what he needs to scan and print it, I'll let you know, Cheers Kym.
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  4. #14
    Learner Driver
    Join Date
    May 2019
    Location
    QLD
    Posts
    4
    Hi HzSanfan
    Iam having the same issue as you as I have the cap [ left in photo ] the plate for the cap [ top centre of photo ] but not the star piece.Even with that Iam not sure how it would fit to steering wheel.If you are getting that piece printed I would certainly be interested in buying one from you. Thank you DALE

  5. #15
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Quote Originally Posted by daleg View Post
    Iam not sure how it would fit to steering wheel.
    DALE
    G'day Dale
    The "star piece" has two holes on the outer edge, that line up with any 2 of the 6 holes on the alloy horn contact plate. (The part that mounts with the 4 bolts & springs to the steering wheel centre)
    Just need to find a couple small screws with the same thread as the Allen key bolts from the earlier horn cap.
    Hope that makes sense!
    Cheers
    Max

  6. #16
    Learner Driver
    Join Date
    May 2019
    Location
    QLD
    Posts
    4
    Thanks Max that makes perfect sense.All I need now is to find that star piece as I am missing it.
    Cheers
    Dale

  7. #17
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    I have spoken to a guy that is prepared to 3D print the nylon attaching ring but he needs all the correct dimensions to enable him to design the part for the printer.. I only have half of the ring and would only be guessing if I gave them to him. Would anybody be able to help with these measurements of the pictured ring? TIA, cheers Kym
    HornBaseHZ.jpg HornBaseHZb.jpg HornBaseHZa.jpg
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

  8. #18
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Im guessing you didnt do any good with the eBay one?

    I think I have come up with one of these, that I could borrow, but he wouldn't allow me send it to you for copying.
    I might be able to check out getting it copied. Any idea how much your contact was going to charge to 3D print it?, so I know if I can get a good price.
    Also, not knowing much (anything) about 3D printing, is there a scale or degree of accuracy printer needed?

    Cheers
    Max

  9. #19
    Learner Driver
    Join Date
    May 2019
    Location
    QLD
    Posts
    4
    If you can get a copy made I would certainly be up for one as well.
    Thanks Dale

  10. #20
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    Quote Originally Posted by maxsandman View Post
    Im guessing you didnt do any good with the eBay one?

    I think I have come up with one of these, that I could borrow, but he wouldn't allow me send it to you for copying.
    I might be able to check out getting it copied. Any idea how much your contact was going to charge to 3D print it?, so I know if I can get a good price.
    Also, not knowing much (anything) about 3D printing, is there a scale or degree of accuracy printer needed?

    Cheers
    Max
    Just the dimensions would be great Max, I can then have a drawing done to send to him, I have the half piece to get the finer measurements of the groove around the outer circle, Cheers, Kym

    - - - Updated - - -

    Quote Originally Posted by daleg View Post
    If you can get a copy made I would certainly be up for one as well.
    Thanks Dale
    No problems Dale, I'll let you know, Cheers mate, Kym
    HZ Persian Sand Mk2 Sandman (under full restoration)
    HX Chamois Monaro GTS

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •