Results 1 to 5 of 5

Thread: HZ panelvan chassis measurements

  1. #1
    Learner Driver asdf88's Avatar
    Join Date
    May 2011
    Posts
    9

    HZ panelvan chassis measurements

    Hi all,
    I'm not sure if this forum is still active, so I will give it a try and see what happens. I'm restoring a HX 308, 4-speed panelvan that will be a Sandman tribute car.
    The van had been in a minor accident previously with most of the repairs concealed. When I was stripping the car down, it was evident that the drivers side cab corner had been bent. After removing the chassis and laying it on a relatively flat floor, I notice that the front rails are not level with each other. There is approx. a 2cm difference in the height of them (see the photo). I saw that something was wrong when I took off the radiator support panel which had many spacers on the drivers side but none on the passenger side.
    My question to the experts is does anyone have all the measurements and dimensions for what a straight factory frame should be?
    Thanks.
    Chassis.JPG

  2. #2
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    If you use the search function on this site and search for 'chassis dimensions' you will see a thread started by hk1837 that has a diagram attached. That will answer your questions. Sorry I can't put the link on my phone

  3. #3
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463

  4. #4
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    Thanks WB. The simple answer is they should be level. Most smash repairers would be able to correctly align it

  5. #5
    Learner Driver asdf88's Avatar
    Join Date
    May 2011
    Posts
    9
    Thanks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •