Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Pinchweld questions

  1. #1
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624

    Pinchweld questions

    Hey guys, my HX van has 60A trim, chamois/black & needs new pinchweld.
    From reading threads on here I think it should have chamois pinchweld round the door jams. Question... what about in the rear of van, the cargo floor edge directly behind seats, And rooflining strips along sides of van, do these match trim code, or the vynacote rear colour, or rooflining material colour??

    My local trimmer doesn't carry pinchweld for holdens, but could order it in. Is there different quality of pinchweld? Between trimmers supplies & rare spares(seeing a lot of rares stuff is inferior quality to original fitment)

    Hope someone has some helpful info for me,

    Cheers
    Max

  2. #2
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    The Rare Spares pinchweld is ok i have already bought mine in Buckskin
    Pretty sure the pinch weld matches the hood lining in Vans
    Only the back boards on the seats are done in Vynacote Grey afaik
    someone correct me if im wrong

  3. #3
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    OK, so I rang Sydney rare spares, & the only way they sell pinchweld is in 3 mtr lengths. Which is the length for the doors. Which means they want me to buy a 3 mtr length for each side of the rooflining strip (about 1700). Seems very uneconomical.
    Does anyone know if other rare spares sell pinchweld by the metre? From my measuring I would need around 10.5 mtrs, but the way rares in Sydney sell it I would have to buy 5 x5mtrs to do the van

  4. #4
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Afaik the pinchweld only comes in one size

  5. #5
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    I must be living in the past, where they cut to measure what length you need off a roll.

  6. #6
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    You once could buy it at Clark Rubber off the roll.

    Seems you still can. Colour might be your issue?

    https://www.google.com.au/search?cli...d+by+the+metre
    Last edited by Innuendo; 24-11-2019 at 10:58 PM.
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

  7. #7
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Was going to mention Clark Rubber but it only comes in black

  8. #8
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Thanks for the link, i will check it out. When I went to the local Clark rubber agent what they had in stock was smaller & different shaped. Yes only in black

  9. #9
    Try eBay.
    Got mine though them.

    Cheers Kiwivan
    It is not about the journey,It is the style we travel in!

  10. #10
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    https://betterautorubber.com.au/?s=PINCHWELD

    At least there are some suppliers who sell by the metre
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •