Page 1 of 9 123 ... LastLast
Results 1 to 10 of 83

Thread: HX Sandman project.

  1. #1
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463

    HX Sandman project.

    Well I guess I might start on my ute. It’s got some rust and I tossed up doing a body swap. There are no good value bodies about it seems. So I am going to change the left quarter first. I started to repair it but I reckon that it’s going to be easier and better to just swap it with a Rares one.
    This is new to me, never having pulled a welded on panel off before. I am hoping it goes ok. I bought a spot weld drill and a set of panel chisels.
    This is on a budget of nothing so I have to try and do it all my self. The time frame is hopefully not too long. I think I bought it in about 06/07 so I guess I haven’t rushed into yet anyway. $600 for a Sandman ute rolling shell at the time.

    6348291D-F997-4761-A780-1B191399D896.jpeg

    0790480A-02FB-4008-B3F4-2ABEB4A801AA.jpeg

    DF580D45-B4B3-4D00-A7B0-0CA34583964F.jpeg

    5450D460-B78F-42C5-9E50-CB93BC9F2F0D.jpeg
    Last edited by wbute; 20-07-2019 at 12:39 PM.

  2. #2
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Good on you for starting the project, WBute.

    I know its probably already been posted on the site, but out of interest and continuity for your thread, could you put up the original specs of your ute, please.

    Maybe a wish list of parts you are looking for......

    good luck with the build
    cheers
    Max

  3. #3
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    Good work WB. Nice colour combo with the stripes you got

  4. #4
    Looking forward to progress pictures

    Cheers Kiwivan
    It is not about the journey,It is the style we travel in!

  5. #5
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Good to see you start i know the feeling only to well its a daunting task can only go forward from here

  6. #6
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    About bloody time
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  7. #7
    Sandman Driver damienengland's Avatar
    Join Date
    Oct 2012
    Location
    Chelsea, Victoria
    Posts
    779
    Nice one wbute! $600 for a Sandman ute is a pretty good deal.

  8. #8
    It will take some time, so be patient, you will have to use the cutoff wheel at bottom of 1/4 to remove from sill.
    There is not really enough room to drill out from the inside.
    And again reattaching the new 1/4 to sill is difficult, hard to get your head and welding helmet down from the inside at the same time.
    Have always wondered how the assembly sequence went in the factory.
    Enjoy the rebuild.

  9. #9
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Quote Originally Posted by maxsandman View Post
    Good on you for starting the project, WBute.

    I know its probably already been posted on the site, but out of interest and continuity for your thread, could you put up the original specs of your ute, please.

    Maybe a wish list of parts you are looking for......

    good luck with the build
    cheers
    Max
    It’s Deauville Blue, 253, 4 speed. 18V slate black trim. 3:36 diff.
    I don’t have the engine or gearbox that matches it. I am not going to stick to closely to original I don’t think. It will be as per factory on the outside but I have a308 and 4 speed for it that a mate donated. I really want to go with a fuel injected 5 litre though, sort of 90’s retro tech. I am not certain I want slate black seats either. My WB is down the original line and I don’t really want two exactly the same. Oh I have a full factory AC system for it too.
    I hopefully have everything thing I need here, except I have to actually get the motor and box from Dubbo yet.

    - - - Updated - - -

    Quote Originally Posted by Robbo_NZ View Post
    It will take some time, so be patient, you will have to use the cutoff wheel at bottom of 1/4 to remove from sill.
    There is not really enough room to drill out from the inside.
    And again reattaching the new 1/4 to sill is difficult, hard to get your head and welding helmet down from the inside at the same time.
    Have always wondered how the assembly sequence went in the factory.
    Enjoy the rebuild.

    Thanks for the tip! I am just working it out as I go. I was wondering what I was going to find along he sill.

  10. #10
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    I’ve got a HX ute parts car sitting on the farm. I’ll try to remember to get some pictures in case you need any little patch panels. Can never remember if the body is any good.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •