Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Indicator stalk and wiper motor

  1. #1
    P Plater
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    88

    Indicator stalk and wiper motor

    A couple of random questions for members. How do I remove the end of the indicator stalk? Is there a plate between the preslite wiper motor and the firewall? I know there is a rubber spacer, but my parts manual shows a plate as well.

  2. #2
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Yes there is a plate between firewall and wiper motor

  3. #3
    P Plater
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    88
    Thanks V. I cannot find a pic of it. Looks like about 5mm, I think I can make one.

  4. #4
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    Quote Originally Posted by Dawso View Post
    A couple of random questions for members. How do I remove the end of the indicator stalk?
    HQ-HJ: Remove the steering wheel and remove the Phillips head screw that holds it on. Then slide out the hole.
    HX-HZ: Remove the steering wheel and remove the Phillips head screws (3?) that holds it in place and then unplug the wiring from the column and pull the whole thing forward to remove working the wiring through.
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

  5. #5
    P Plater
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    88
    Thanks but I just want to remove the plastic bit of the end of the stalk. I know it comes of but how?

  6. #6
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    Are you talking a simple indicator only stalk (HQ/HJ) or a later multi function one that does high beam etc as well. If its the simple one the end (last inch or so) just screws on as far as I know

  7. #7
    P Plater
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    88
    Mine is a HZ, so multifunction I assume. You can push it down and turn it clockwise and anticlockwise.

  8. #8
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Quote Originally Posted by Dawso View Post
    Thanks V. I cannot find a pic of it. Looks like about 5mm, I think I can make one.
    I will grab a pic and thickness tomorrow for you i just took mine off the other day

  9. #9
    P Plater
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    88
    Thanks V. I did a search through my spares and found one, happy days. I'm still not confident getting the end of my indicator stalk. Don't want to break it. I need some more advice.

  10. #10
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Never done it, but I've seen these in pieces & with different coloured knobs on them, so they definitely come apart. Im sure the little cap on the end of the multifunction switch pops out, (I would use a pik tool, or point of a test light). When the end cap is off, you can see little fingers or claws holding the twist bit on to a shaft, if you push the claws apart, the knob will come off.

    Good luck
    Max

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •