Results 1 to 10 of 10

Thread: Full rear bumper, access to spare

  1. #1
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181

    Full rear bumper, access to spare

    l am just wondering what guys have been doing for access to the spare when running the full rear bumper set up. l have spent the last 2 years running around with no spare and l think it is time to fix this situation !!

  2. #2
    i thought you could still access through the number plate area.but you will need to use the spring loaded fold down number plate holder from a sedan

  3. #3
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181
    Ahh that seems like it might be the go, thanks

  4. #4
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Yes, I had full rear bumper on a van for years, & could access the winch through the bar with the number plate on the sedan hinged bracket. I think it might have slightly hampered the jack handle & you had to jiggle it into the drive of the hoist, but yes still worked OK

  5. #5
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181
    Has anyone on the Perth area got a jack handle they want to off load ?

  6. #6
    Quote Originally Posted by Spike View Post
    Has anyone on the Perth area got a jack handle they want to off load ?
    If you are talking about the crank handle to winch down the spare Spike, I made my own out of some rod and welded a square nut on the end.
    If you made your own you could make it longer so it wouldn't be a pain in the backside with the hinged number plate.
    I'll try and take a pic of it later on today if you like.

  7. #7
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Commodore utes use a similar handle, but it doesn't fold in half, therefore a lot stronger. It will need cutting in half & lengthening, but should be able to find one at a wreckers or on a com buy swap sell site

  8. #8
    Quote Originally Posted by maxsandman View Post
    Commodore utes use a similar handle, but it doesn't fold in half, therefore a lot stronger. It will need cutting in half & lengthening, but should be able to find one at a wreckers or on a com buy swap sell site
    That's why I made my own Max, found one at the biggest wrecker in town and he asked $60 for it. Obviously I said no, lol.

  9. #9
    Leadfoot Spike's Avatar
    Join Date
    Oct 2014
    Location
    Perth
    Posts
    181
    Thanks team, taken on board

  10. #10
    Take the sedan bumper off and put the proper bumpers back on ..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •