Results 1 to 7 of 7

Thread: Alloy Radiators, and a warning !

  1. #1
    P Plater HXsman's Avatar
    Join Date
    Jul 2016
    Location
    Melbourne
    Posts
    96

    Alloy Radiators, and a warning !

    Hi All,

    My radiator died recently so had to go alloy, bought one on ebay and it appears that the intake dimensions for the transmission cooling lines are metric rather than imperial. Tried another alloy supplier and the same issue.

    Try to find an adaptor from metric to imperial to fit the lines is near impossible!

    Anyone else had the same issue or know of a decent alloy radiator supplier that does it well?

    These imports are not that great !!

    Appreciate your thoughts
    Last edited by HXsman; 24-07-2017 at 07:31 PM. Reason: typos

  2. #2
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Yes, Ive been warned by a mate who is in the rad trade to be careful of aftermarket radiators for automatics, he said the lines inside the tank are also smaller & have trouble cooling autos. He said generally the Radiator themselves will work OK for a few years, but be careful for an auto

    The best way to get yours going is to buy fittings with spiggots for the rad & a short length of the orange coloured transmission rubber hose (ortang??) something like that

    cheers
    Max

  3. #3
    P Plater
    Join Date
    May 2010
    Location
    country victoria
    Posts
    33
    im running an alloy rad in my van , it works ok but i wouldnt have trusted it with auto lines so i run a separate trans cooler this way you guarantee the trans is safe from water and doesnt matter if the motor gets hot either

  4. #4
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Is it not possible to get a genuine radiator re-cored now?

  5. #5
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    I personally wouldn't go near an alloy radiator where a brass version should exist for a whole range of reason.

  6. #6
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Quote Originally Posted by Innuendo View Post
    I personally wouldn't go near an alloy radiator where a brass version should exist for a whole range of reason.
    Yeah I wonder about them too. Just look at how the inlet manifold and water pump corrode. Alloy and steel don't really like each other.

  7. #7
    Your absolutely correct , an aftermarket alloy radiator will have problems if you pipe it in just run a separate trans cooler and you should be ok.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •