Transmission Lines - Trimatic

[HXsman]

Hi Everyone,

I thought I would replace my dodgy transmission lines whilst my engine was out. When I placed the new ones in the engine bay, they take a different route to the old lines. It's quite possible that the old ones were incorrect.

Just appreciate your thoughts that the new ones are correct as I'm worried about the extractors etc.

Appreciate your help as always

Transmission-lines-2.jpg

[Big Rob]

Looks like one set is from a 6 and the other a V8, but I'd need to check both my van and ute to be sure.

[HXsman]

Thanks Rob, that would be appreciated

[Sandaro]

New ones look correct for V8 ones. That said, standard they are made for standard exhaust, so obviously you're going to have to check clearances to extracators

[Big Rob]

Yep. new ones are correct for a V8 but as Sandaro says, you may need to manipulate them to clear exhaust.

[HXsman]

Thanks everyone, appreciate your help, its good to know before I go to the trouble of putting the engine in, best to know now.

Cheers


Dean

[Valencia]

Could i ask where you bought the new lines from

[HXsman]

Hey, bought them on ebay: http://www.ebay.com.au/itm/NEW-HOLDE...item33d0bc9b95

$149

Cheers


Dean

[Valencia]

Hey, bought them on ebay: http://www.ebay.com.au/itm/NEW-HOLDE...item33d0bc9b95

$149

Cheers


Dean

Thanks