Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 73

Thread: Big Rob's HZ Ute Shop Truck....

  1. #11
    Lucky you wb ,I reckon Rob would go round it on his bike

  2. #12
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Quote Originally Posted by wbute View Post
    Just the pick Rob. It's standard. I can't lower it and get along the gravel roads here. Well not without dragging the cross member and exhaust everywhere.
    The GTS wheels suit the look of the ute. How does it go with the 6 in it? I've never driven one with a 6!
    Ha! Me neither!
    It's a bit of a slug and the Trimatic is slipping a bit in top gear so I need to give it a filter, band adjustment and some fresh trans fluid and then I'll let you know. It accelerates well though so I'm optimistic.... and a 350 Holley is on the cards if it needs it.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  3. #13
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Serviced the Trimatic today.....
    I've never seen so much black crap in the bottom of a trans pan in my life!
    I was so surprised I didn't take a photo, but it was more than 1/8" thick... I don't think it had ever been serviced before.

    I haven't driven it yet but it's certainly a lot crisper when changing from neutral to drive or reverse so I'm hopeful it's good.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  4. #14
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Nice. It will probably die of shock now.

  5. #15
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Quote Originally Posted by wbute View Post
    Nice. It will probably die of shock now.
    I really hope not! This cheap ute is starting to cost more than I planned and I really don't feel like adding a trimatic to the list of replacement parts, but we'll see....
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  6. #16
    It's a rockin' Robbo's Avatar
    Join Date
    Mar 2010
    Location
    Sunshine Coast
    Posts
    1,572
    It will be sweet, can't beat the old holden utes. There's not much to go wrong with them anyway.
    "Proud To Be An Old Fart".

  7. #17
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Quote Originally Posted by Robbo View Post
    It will be sweet, can't beat the old holden utes. There's not much to go wrong with them anyway.
    Fuel or Spark

  8. #18
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Master cylinder arrived this afternoon so it's going in in the morning..... then hopefully I'm going for a drive to see how the trans is.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  9. #19
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Master cylinder fitted after bench bleeding it.... has fixed my locking-on brake issue. As I'd suspected the fluid was getting behind the plunger seal and then stopping the plunger returning fast enough, causing the brakes to bind.

    Trans overhaul went ok, it accelerates well in 1st and 2nd, but seems a bit soft changing into 3rd.
    The strange thing is that if I shift manually from 2nd to 3rd it shifts well.... I haven't quite worked out why yet.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  10. #20
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Is it a vacuum leak? My brothers VK used to always seem to have a perished vacuum hose stopping it going into third.

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •