Front end rebuild

[Kiwivan]

You would assume they did it correctly?

Yes I am
Kiwivan

[jason.ruff]

images.jpg

[Kiwivan]

You are 100% correct
I did check with them and they confirmed tensioned on ground.
Thanks guys would recommend doing this to everyone.

Cheers Kiwivan

[wbute]

You are 100% correct
I did check with them and they confirmed tensioned on ground.
Thanks guys would recommend doing this to everyone.

Cheers Kiwivan

No worries

[Sand rig]

Want a corner carver? Use poly for the sway bar and strut rods. I used Moog on the bushes.

[Kiwivan]

I just want a comfortable cruiser
And she does that just fine

Cheers Kiwivan

[HJsandman75]

All my control arms have new bushes and ready to go, I'm looking to re-paint the springs in original (as per factory specs) but am unsure on what the original colour was, can anyone please assist? How can i tell if the springs are original or lowered, will the overal spring length tell me this? It's in a HJ 308 ute.

[Kiwivan]

Well what a cock up.
Just had to do a rebuild of the front end.
Our Holden dealer stuffed up by not putting the left hand side spring in correctly.
End story new bushes.
No wonder they could not do a wheel alignment correctly.
This time done correctly and drives extremely good.

Cheers Kiwivan

[pj350]

Yes well that would do it. ..
And you put all your confidence in the mechanic cause he's a holden dealer ( you and your family) it's scary stuff ...
I know of a person car serviced by a holden dealer they were driving along and the front wheel has decided to leave the vehicle just as well they were turning a corner and not going at speed.