Results 1 to 10 of 129

Thread: Project Papaya

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128

    Project Papaya

    Hello folks,

    I am new to the world of Sandman panel vans and likewise new to the world of vehicle restoration projects. A bit over 12 months ago I saw a gorgeous panel van at a Shine and Shine at Atherton in Far North Queensland. My wife and I immediately fell in love with it and decided that we needed one. Need is a far better description because it then becomes a matter of life and death. I almost immediately found a van that required a lot of work and almost purchased it. The owner however had a change of heart and I found myself on the lookout again.

    One year later at the Atherton Show and Shine of all places there was an old guy with a piece of gyproc plaster board that had a couple of really average photos of what was supposedly a genuine Sandman Van for sale. I got talking with him and found out it required a complete restoration and that it had spent the last 14 years in storage. I did a bit of research and a week later viewed the van. He was not lying, the van is a genuine Sandman and yes it was in need of a complete restoration. With rust in the rear left roof, both rear quarters behind the wheels, rust in the front cowls, a completely rusted out upper tailgate and other bits and pieces. The interior looked very average with the seats and centre armrest needing lots of love, bare floors with surface rust, cracked dash pad and a general shit fight.

    Mechanically I was on a winner, the 308 engine had just had a rebuild prior to storage with Yella Terra heads and a lumpy cam added. It absolutely purrs. The transmission is a four speed Top Loader with an approved QLD Mod plate. Unfortunately the engine and chassis numbers do not align to the plates, it has a HQ chassis and a QLD Police engine number. The van had also been painted blue.

    image.jpg
    image.jpg
    image.jpg

    I decided early on in the piece (with a lot of suggesting from my wife) that I would hand the vehicle over to an expert for the panel and paint and I was fortunate enough to enlist the services of a Bruce from Fast Lane Body Shop in Cairns. Bruce has 42 years experience and learnt his trade skills the old fashioned way. He normally does work on hot rods however agreed to take the van on. Thank God for that for as you will see in the following photos the van has a lot more rust than first expected.

    image.jpg
    image.jpg
    image.jpg
    image.jpg
    image.jpg
    image.jpg

    In amongst the rust we have found dodgy fiberglass repairs, the worst so far being the beaver tail stuffed full of steel wool and fibre glassed over. I know the van is forty years old and it survived the questionable repair methods of the 70's and the 80's, but really guys, steel wool !!!

    Sorry for the long winded introduction to this project, I just wanted to paint the picture. I am already learning, that what is think you see before you is not necessarily what is before you. I will update this post with findings and photos as the restoration unfolds. Thank you for taking the time to read my ramblings.
    Cheers,
    Last edited by DNO62; 29-07-2016 at 04:36 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •