Page 7 of 13 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 129

Thread: Project Papaya

  1. #61
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128
    Quote Originally Posted by Innuendo View Post
    I've got that exact fuel tank!

    Looking good mate.
    The tempary tank was necessary to move the van in and out of the spray booth. We dropped the fuel tank only to find the most putrid contents. 14 year old stale fuel along with moisture that has most probably formed from condensation resulted in a tank that needed some loving. **** it stank.

    I sent the tank off to the local radiator repair mob who thoroughly cleaned it and applied a chemical lining that is impervious to fuel. Probably the best $350 spent during the restoration. Oh and of course while the boys were cleaning the tank they discovered that the fuel quantity sender unit was shagged; another $137.

    Thank God for Rare Spares and the Internet, to date they have had all the bits and pieces that I have needed.

  2. #62
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    I've got the fuel tank out of my HG Van and the temporary tank cable tied in the engine bay so I can still move it about.
    Has exactly the same look. Your right, stale fuel stinks!

  3. #63
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    i had a injected 304 driving round the block 4 times on a mixture of 50% water and 50% petrol before I discovered why the engine was misfiring. just replaced the tank and had injectors cleaned.
    yes, i think i'd rather smell shit than stale fuel.
    BQZ

  4. #64
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128
    Hello folks,
    Things are still progressing, just a little bit at a time, nice and steady.
    Currently the van is at the upholstery shop having a new roof lining installed along with the carpet, seats and a few other little bits and pieces. Then it's back to Bruce to do the last bits and pieces, such as reinstall the windscreen (not reinstalled prior to going to the upholders as it makes it a shit load easier to install the roof lining with the windscreen out), some last minute minor paint touch ups, a good cut, polish and final buff.
    It's getting closer to coming home.

    Below is a photo of my girl at the upholstery shop.

    image.jpeg

  5. #65
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    Looking good, great colour.

    Just make sure the wind doesn't get under the rooflining when you bring it back from the upholsterers.

  6. #66
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128
    G'day Innuendo,

    Thanks mate that is some good advice there, thankfully the upholstery shop and the panel shop are only two blocks apart and Bruce will be accompanying the vehicle.

  7. #67
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Very nice colour indeed

  8. #68
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128
    Happy days.........

    I had a delivery to the door of my man shed last Tuesday and I couldn't be happier.
    The marathon nine month bare metal strip, rust repairs and panel and paint has finally been completed back to original colour, the upholstery has been completed including seats, headlining, carpet, center console, the electricals' have been 90% completed (electricals' are never ever really completed, there will always be something that will give be you the shits).
    Now all that remains is to do a final hand cut and polish, sort out the mechanicals as in having some brakes when I press the pedal would be nice, sort out the top loader gear linkages, renew the chrome work under the bonnet, new bonnet cable, new repeater lights, new tail lights, polish the wheels (that should be fun) and add the Sandman stickers and it will be done. Or bloody close to it...
    Oh and have roadworthy inspection and get it registered. That shouldn't take long. ������
    Attached Images Attached Images
    Last edited by DNO62; 30-03-2017 at 07:23 AM. Reason: Photos upside down and I can't work out why.

  9. #69
    It's a rockin' Sandaro's Avatar
    Join Date
    Jul 2011
    Location
    Picton NSW
    Posts
    1,128
    Congrats on the progress. How good does it look? Fantastic (even upside down)

  10. #70
    Leadfoot DNO62's Avatar
    Join Date
    Jun 2016
    Location
    North of Port Douglas
    Posts
    128
    Yep upside down pictures adds to the mystiec, I have no idea why that has happened. The photos do actually right themselves when you click on them.
    If anyone knows how to turn them up the other way, some advice would be appreciated.

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •