Engine bay sound deadening mat

[hxbunny]

G'day Gregbark,

the only thing I could say is if the harder material was on the underside ( closest to the motor ) and the soft stuff was on the other side it would look a lot more like the original.

It does stop a lot of heat coming from the engine bay though.

Cheers

[gregbark]

We have discussed this with the factory but the material used now forms and holds better the way it is. I agree with the look but we have to consider the use and production. Considering we couldn't get a similar material for many years ,until recently, this is what works best. The older material often deteriorated and crumbed quite easily with age.

[wbute]

We found it hard for the sheep to stay in place when the engine was running. I suspect that shearing them would be the way to go.

Easy to see why some companies fail really.

[Big Rob]

I always pulled the ugly things off if one was fitted anyway. They deteriorated, got dirty and stayed that way and served no real purpose. They only seemed to be on Statesmans and some Premiers..... I never owned a van or ute with one.

[agr071]

We found it hard for the sheep to stay in place when the engine was running. I suspect that shearing them would be the way to go.

Bwahahahahahahaha or should I say Baaaaaaaaaaaahahahahahaha

[maxsandman]

I would guess this was fitted to vehicles with A/C or if specially ordered

cheers
Max