Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: 253 Extractors?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Leadfoot
    Join Date
    Feb 2015
    Posts
    173

    253 Extractors?

    Hi guys and girls, just wondering what extractors people are running on a 253? also twin exhaust size and muffler selection, I want a nice sound, not building a race van just want a nice sounding van. thanks for your help, cheers also the motor has a holley fitted what is the options for air cleaner/ can a standard air cleaner be adapted to fit a holley? Thanks again

  2. #2
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    If you get a quadrajet you can run the standard air cleaner. Was standard set up on blue 253
    Any extractors are going to work.
    I like 2" twin system with a single two in two out glass pack muffler but there are many options. Just make sure you have the pipes joined somewhere to get a decent note.

  3. #3
    So a balance pipe give a better sound I always wondered why they were there

  4. #4
    Balance pipes stop droning

  5. #5
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463


    - - - Updated - - -

    You don't need one with a single muffler and that will give a deeper note as well.

  6. #6
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    One of my Toranas has a 253 with a 350 Holley and a set of Pacemaker extractors with a 1 1/4" primary pipe. I bought them to fit on my blown motor but it has 4 into 1's and I like the way they work, so I threw them on the other Torana with a 2" system I built from pipes I had laying around.
    They sound pretty good, but I don't have a balance tube and they do drone a bit (but I don't mind that).

    253's respond well to a bit of head porting, extractors and a small 4 barrel carby (like a 600 Holley), and a good ignition.
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  7. #7
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    I like the note of your WB James. That's a 2 in 2 out system yes?

  8. #8
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Yeah it is Inuendo.

  9. #9
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    Quote Originally Posted by wbute View Post
    Yeah it is Inuendo.
    I had the very same set on my HQ Ute in 1982. It sounded great also, although it was a six.

  10. #10
    Cruiser
    Join Date
    Nov 2012
    Location
    Busselton
    Posts
    461
    I asked the same question here a few years ago and fitted my exhaust based on the most popular answer. Extractors, 2 inch twin pipes ( I put stainless) no balancer and 2 lucky glass mufflers. I have a 465 four barrel Holley carb. I couldn't be happier with the sound and like all 253's it will do 0-100 in a little under 48 hours but sounds cool while its getting there.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HQ-WB V8 Extractors
    By hxbunny in forum My Items For Sale or Buy
    Replies: 9
    Last Post: 23-04-2013, 06:16 PM
  2. 202 Commodore Extractors Into WB Ute?
    By Dylan in forum Engine
    Replies: 4
    Last Post: 22-04-2013, 08:42 AM
  3. Extractors
    By Valencia in forum The Lounge
    Replies: 16
    Last Post: 23-03-2013, 04:12 AM
  4. Extractors
    By HK1837 in forum Archive
    Replies: 0
    Last Post: 04-03-2012, 07:28 PM
  5. Extractors
    By hj308 in forum Engine
    Replies: 1
    Last Post: 04-03-2012, 07:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •