Hey guys,

Just thought I would ask to see if maybe some of you have had similar problems. I've transplanted a 308 from a hz statesman into my HZ p/van and it had been sitting for a few months before and after the engine swap and now trying to start it up it turns over great, getting plenty of spark, fuel and air (seemingly) but it just wont start. It occasionally backfires a little (very small backfire) out of the carby, and it did the same once out the exhaust but it just wont kick into life.

Any idea why or what the problem may be? we have re-set the ignition timing, had the rocker covers off and all the push rods / valves seem to be moving fine, it appears like its getting everything it needs it just wont go.

any and all help would be appreciated. if a valve is getting stuck / not opening properly could that be part of the cause?

Cheers guys.