wb trimatic coloum linkages

[XX7SANDMN]

just dropped a wb 308 trimatic into a hz itonner but want to keep it coloum auto just checking if the 6cly and v8 linkages from the steering colonm are the same i iknow ive gone from 4 speed to auto so need left side set up for blue mtr ive got a hz auto coloum but cant remember if the 6 and 8 set up is the same

[Dr Terry]

WB Tri-Matic column shifter uses a right-hand shifted box, the same as HQ-HZ boxes. The left-hand boxes were floor shift only.

Dr Terry

[HK1837]

If you want to use that box you need to take it and a RH shift donor box to a good auto trans shop and get them to put the internal crossover stuff in out of the donor box to make it into a RH shift box. I don't think it is as easy as a straight bolt in though, but you'll know you've found the right shop when they know what you are talking about.

[Vombil]

Look up LOKAR. they do a cable for that particular purpose. so for $215 you can have it to your door in kit form and not worry about a tranny shop

[mook]

Yeah I got that kit, not installed. But it's going to solve slot of problems with clearance issues thanks to the cable. Also got the adjustable trans linkage.

[XX7SANDMN]

thanks guys so thats why i cant find a left side shift linkage set ill check out lokar or maybe go back to floor shift thanks again

[HK1837]

If you go to a console shift just use a HQ-HZ TH400 shifter or rebuild a trimatic one back to front.

Another option which I did in my Overlander tonner was to actually make it a floor shift (not console shift), I used a later UC trimatic shifter which have the shift indication integral to the shfter and simply got a vinyl boot made up for it. The shifter is identical to a TH400 one, just has the extra mountings on the top for the shift indication. You can see it in the attached pictures.

DCP_1283.JPG
DCP_1282.JPG

[Vombil]

if you have hole in floor already id use that

[XX7SANDMN]

thanks ive got a wb stato t bar shifter i can use but i am going to look at coloum set up on hj t400 tonight for ideas

[HK1837]

thanks ive got a wb stato t bar shifter i can use but i am going to look at coloum set up on hj t400 tonight for ideas

You need a WB console in that case, shifter is different to HQ-HZ normal console.