Yeah good point, just thought it was interesting to read. I had thought about N67 superseding the rally wheels but only have a tiny amount of info in my hot little hands.:eek:
Yeah good point, just thought it was interesting to read. I had thought about N67 superseding the rally wheels but only have a tiny amount of info in my hot little hands.:eek:
(Rodney Says)
Fellows I can't quite get the understanding, of the round winch base, I admit there is a difference, however the one we posted last night from our Red Van I consider genuine, the pics above are of a standard base model HQ one tonner we bought recently...
The pics above show the winch base from a HX Sandman van which has never been molested,or modified and is one owner since 6month old....I admit the base is rounder, but has cut off edges so it can be taken out of the rim...
These two pics are close up pics of our HZ red van which we posted pics of last night, and went back to the panel beaters and checked further we consider this to be original although the cone bit appears to be put on upside down...we will be happy to hear feedback
Last edited by Alien DNA; 01-06-2018 at 03:32 PM.
Hmm. I will take some pics of the HX sandman van one (I have sold) and also my Z sandman ute one tomorrow....
Owner (Jason) - STICKTHIS Automotive Decals and Stripes
HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
HZ GTS. Palais White. Next Resto From 99% NOS Parts.
HSV GTO Coupe - Highly Modified
VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build
OK here is a point. The round one was offered as the N67 alloy wheel fitting in WB. Now they are the same one that was used on the rally wheels, one of the others was used for the standard wheels, what was the other one for? There are three part numbers so there was three different ones. Jennie has two of different ones with the sides cut off. Was one for HQ only?
As far as I can see there were two different ones with the sides cut off and one round one. So the round one must have been rally wheels and N67?
I have had a couple of reds so am probably confused.
I think you'll find the one Rodney has posted pics of is for the N66 Rally rims and the round one Greg has is for the N67 Alloy rims.... my memory is a little vague but I seem to recall the plates on my Sandman vans in the 80's had side cut outs like Rodneys but I never really took much notice of them back then.
The big question is does Greg have an original N67 Alloy rim to compare against and does the round plate fit through the hole and sit snug in one?????
4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD
the round one i pictured came off the xx7 tagged hj sandman ute i had i thought..BUT ALAS I AM WRONG.. what is this round one?
but saying this then it is all a presumption until it can be 100 per cent verified.
off i go to find an n67 rim...![]()
Last edited by ozbox; 23-07-2010 at 01:02 PM.
Just had a look under the following cars and Im not much help:
HX Sandman van - missing the winch.
WB ute - Missing the winch
HZ Sandman ute - Missing the plate. winch is there but no plate.
lol.
Owner (Jason) - STICKTHIS Automotive Decals and Stripes
HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
HZ GTS. Palais White. Next Resto From 99% NOS Parts.
HSV GTO Coupe - Highly Modified
VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build
ok,first off i must apoligise to jennie because i took a boy look and not a girl look and she is right..:eek:.i now have nfi what the round one is off as i went looking and found the correct one here,same as what jennie has pictured...my wife reckons i have taken up drugs again...:confused:
now wtf is that round bastard off???![]()
There are currently 5 users browsing this thread. (0 members and 5 guests)
Bookmarks