Page 14 of 15 FirstFirst ... 412131415 LastLast
Results 131 to 140 of 147

Thread: HZ Van Persian Sand MKII

  1. #131
    Cruiser Wombat7051's Avatar
    Join Date
    Oct 2013
    Location
    Caloundra, QLD
    Posts
    345
    Thanks mate. Getting used to it. I had the motor machined, bored, new pistons the works. I had a guy that was going to put it together for me. He fell through due to injury and recommend this bloke. I meet with him and gave him everything and got told about $600. He said he would do it when not busy to help with the price. After 2 years I just wanted it back so I called and got told that the heads needed reco by someone, so with that done it was $1200 all up, but it was really close and just needed the heads put on. Said ok and after a couple of weeks got a call that it needs helicoils in the wet holes. I said ok on the helicoils. Finally got cash together thinking $400/$500 for the helicoils and got told it was now $2650. $1900 for labour and $750 for parts. I gave him everything so I don’t know what the parts are, but $1900 to put the motor together I think is a bit much.but it is home now needs paint. Looking to see if the water pump was painted or not can’t remember

  2. #132
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Water pump is not painted Wombat

    - - - Updated - - -

    Quote Originally Posted by Wombat7051 View Post
    Got the motor back today bit upset, $2650 for a put together and $1500 for machine work. Over 4K just for the motor felling a bit ripped off.
    That's about right for a full rebuild

  3. #133
    Cruiser Wombat7051's Avatar
    Join Date
    Oct 2013
    Location
    Caloundra, QLD
    Posts
    345
    Thanks Valencia

  4. #134
    I would expect 5-6 k for a basic rebuild

  5. #135
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    Quote Originally Posted by Wombat7051 View Post
    Thanks mate. Getting used to it. I had the motor machined, bored, new pistons the works. I had a guy that was going to put it together for me. He fell through due to injury and recommend this bloke. I meet with him and gave him everything and got told about $600. He said he would do it when not busy to help with the price. After 2 years I just wanted it back so I called and got told that the heads needed reco by someone, so with that done it was $1200 all up, but it was really close and just needed the heads put on. Said ok and after a couple of weeks got a call that it needs helicoils in the wet holes. I said ok on the helicoils. Finally got cash together thinking $400/$500 for the helicoils and got told it was now $2650. $1900 for labour and $750 for parts. I gave him everything so I don’t know what the parts are, but $1900 to put the motor together I think is a bit much.but it is home now needs paint. Looking to see if the water pump was painted or not can’t remember
    Sounds rich to me!
    If he's some know race engine guru then maybe...
    Anyway your done now. Bloody hold him to all warranties though.

    Good luck and hopefully things go smooth from now on.
    No paint on on water pump, overspray on timing cover (if you're into that!)
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

  6. #136
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    You’re not going to get much cheaper unless you’ve got a close personal friend or something to do it.

    I used to do minor handyman stuff for family and friends at a good rate. Started getting calls from their friends and their doctors and then the doctors other patients. I had a slightly higher price for them but it was getting to point where it would cut into all my free time and was stopping me from doing my own stuff.

  7. #137
    Cruiser Duc1991's Avatar
    Join Date
    Feb 2013
    Location
    Dalby QLD
    Posts
    235
    Quote Originally Posted by Wombat7051 View Post
    Thanks mate. Getting used to it. I had the motor machined, bored, new pistons the works. I had a guy that was going to put it together for me. He fell through due to injury and recommend this bloke. I meet with him and gave him everything and got told about $600. He said he would do it when not busy to help with the price. After 2 years I just wanted it back so I called and got told that the heads needed reco by someone, so with that done it was $1200 all up, but it was really close and just needed the heads put on. Said ok and after a couple of weeks got a call that it needs helicoils in the wet holes. I said ok on the helicoils. Finally got cash together thinking $400/$500 for the helicoils and got told it was now $2650. $1900 for labour and $750 for parts. I gave him everything so I don’t know what the parts are, but $1900 to put the motor together I think is a bit much.but it is home now needs paint. Looking to see if the water pump was painted or not can’t remember
    Hi Wombat, I kept a tally of my costs and basically it cost me about $6000. That was all new parts throughout. It included $1800 for machine shop labour which included work on the heads. Now for the good part, my brother assembled it for a bottle of good scotch and then my nephew painted it for me. I have since had my other brother recondition the alternator and starter motor. Maybe I'd better get my finger out and get back to it, but I'm still working on my wife's kombi and then she goes and buys a bug.
    Keep at it.

  8. #138
    Cruiser Wombat7051's Avatar
    Join Date
    Oct 2013
    Location
    Caloundra, QLD
    Posts
    345
    BEEF3693.JPG
    AQVI0132.JPG
    First coat done

  9. #139
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Any updates on this one, Wombat?

    I'd like to see some pics

  10. #140
    Cruiser Wombat7051's Avatar
    Join Date
    Oct 2013
    Location
    Caloundra, QLD
    Posts
    345
    I will try and get some more up on the weekend

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Persian Sand Sandman XX7 Brisbane build what is it worth
    By sandvan in forum My Items For Sale or Buy
    Replies: 3
    Last Post: 05-02-2015, 06:53 AM
  2. Persian Sand XX7 Sandman finally started project
    By sandvan in forum HJ Sandman
    Replies: 15
    Last Post: 11-09-2014, 09:18 PM
  3. Persian Sand Sandman?
    By Absinth in forum The Lounge
    Replies: 57
    Last Post: 18-02-2014, 07:35 AM
  4. Persian Sand Met. XX7
    By Max_Van in forum HJ Sandman
    Replies: 74
    Last Post: 03-04-2011, 04:43 PM
  5. Persian Sand Sandmans (A Members Query)
    By Rolla in forum The Lounge
    Replies: 3
    Last Post: 11-02-2011, 06:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •