Tidy HZ ute body

[HK1837]

Looks pretty clean and straight and has a 5spd cpnversion. If no-one bods it would be a great parts car or even a good ute body to use.

http://www.ebay.com.au/itm/HOLDEN-HZ...#ht_609wt_1130

$1000 no bids in Croyden VIC.

[wbute]

Yep looks good.

[RodneyHZ253]

I have messages the guy to find what sort of 5 speed box is in the ute

[HK1837]

Looks like a Celica stick.

[Vombil]

does not like like a supra shifter...

[jennie285]

its a celica box what sort of horse power will these handle would it be ok for 350 to 400

[HK1837]

its a celica box what sort of horse power will these handle would it be ok for 350 to 400

If driven sensibly they will be fine behind a 253 or 308. Just like an aussie 4spd, easily broken but will last if not abused.

To use the box behind a V8 you'll need a bellhouing, clutch plate and might need a tailshaft mod, the one in this ute may have the Celica yoke with Holden uni on it but is possibly a 6cyl one. Crossmember will need modifying too as relative to the 6cyl location the box will move forward by the difference in length between a 6cyl and V8 aussie 4spd. I have a 253/308 to Celica bellhousing and clutch setup at home, but it has longer bottom bolts being a Dellow one so only really useful for HT-HJ as if you try to use it on HX or early HZ you have to wreck the rat-trap as it attaches using the lower bellhousing bolts.

[jason.ruff]

No they are barely able to cope with an angry 6 cylinder let alone a worked 8 cylinder. Supra box is better. Depends on how you drive too.

[Vombil]

the bloke im buying a supra box off suggested his research shows that SUPRA are good for 300hp.