l have problem with the hz bottom tailgate when open l put new tailgate wire cables on one side is at full length the other side has abit slack l measured both cables about 3ml differance l was thinking it could be to with the hinges has anybody ever had this problem
any idears tailgate is not bent in anyway opens and shuts lines up oka
there are 2 different size cables, i have had the same problem. best thing take the short one off and head down to your local wrecker.
Driver -1981 WB kingswood 253 4 speed
Weekend- AC Cobra replica 302ho(425hp) 4 speed toploader
Project Complete- SLR 5000 LH mock up(next door Neighbors)
never late in a 5.0 litre
ha i never even considered that Buck. i just thought one would be longer because it has stretched or diff in hinge location and so on
BQZ
There are two cables 9937638 which does HD-HG, HJ-WB Ute & Van where the wire is about 385mm between fittings. The HQ Ute part 2816259 is about 355mm between fittings ( where the crimping is). the 30mm variance is what may be causing your fitment issues. There is a similar situation with the hinges where the HQ is different.
l bought them from kingswoodcountry yes the hq are shorter to take out the slack of the left side the cable needs to be l measured 8ml shorter its frustrating to all the weight on one side and it dont look right was thinking of finding someone that does crimping to take out the slack and some of the weight anyone else know what to do got be someone here had this problem and fixed it thanks all help apprieciated
Most good hardware stores that sell stainless wire cable would have a crimping tool and crimps. I've done a lot of balcony handrails and borrow the tool from my local store at no charge, so I'm sure if you went in an had the cable ready to crimp they would be happy to let you buy a crimp and do it on the spot.
Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!
Or try a ships chandlery they do heaps of this stuff for yachts etc
Or just buy a set of matching ones?
Now ya talkin' !Originally Posted by playwme
I have contacted Sandman 78 and will try and resolve his issue with a pair of matching cables. A bent hinge, that was straightened, may be part of the problem. Results will be posted.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks