Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Removing ignition barrel ..explained

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385

    Removing ignition barrel ..explained

    Firstly you need to remove the steering device..then you will be staring at this...



    Then you need to remove the switching stuff which is held on with screws..you will work it out..:eek:
    You will then be staring at this and it may confuse some because there is no slot to put your thin screwdriver or knife into to release the barrel..this van had its original ignition..you need to poke a hole thru the alloy as per the pics below..





    You also need to have the ignition in the off position..not lock or accesories but off..1 back from when the red dash lights should be on..



    Then you can poke at the slot and pull out the ignition barrel with the other hand...thats if its being nice to you..if its not use a larger flat head screwdriver to lever the ignition barrel out slightly..





    This is exactly the same removal procedure for all models hq to wb and also lj to uc torana and vb to vl commodores.
    Last edited by Alien DNA; 01-06-2018 at 12:40 PM.

  2. #2
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    Good one Greg! This one can be a prick! of a job!!!!
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  3. #3
    P Plater
    Join Date
    Jul 2010
    Location
    Albany Creek
    Posts
    45

    Removing ignition barrel

    I tried this, but problem is I have no key for this car or the spare column I have , to get it in the off position so I can change the barel over to a new one. Got any Ideas ???????

  4. #4
    Cruiser
    Join Date
    Apr 2010
    Location
    Southern Highlands NSW
    Posts
    342
    Quote Originally Posted by gypsy View Post
    I tried this, but problem is I have no key for this car or the spare column I have , to get it in the off position so I can change the barel over to a new one. Got any Ideas ???????
    Oxy set:lol:

  5. #5
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    Quote Originally Posted by gypsy View Post
    I tried this, but problem is I have no key for this car or the spare column I have , to get it in the off position so I can change the barel over to a new one. Got any Ideas ???????
    gypsy,when i dont have the correct key i use a box of full of spare keys that i have collected over the years to 'jiggle' the lock...when that doesnt work i take it to a locksmith and get him to jiggle the lock out with his special tools..go see the thread about removing the top pot and then ring your local locksmiths to make sure that they can do the removal for you...failing that you need to buy another top pot without a barrell in it...if you cant do any of that ring me and i will sell you a top pot with a new ignition already fitted.

  6. #6
    P Plater
    Join Date
    Jul 2010
    Location
    Albany Creek
    Posts
    45

    Lightbulb Removing ignition barrel

    Thanks got coffee pot off. I think someone has jamed a screw driver up it before plus we had to snap the lock to get it out of the blokes back yard. I'll be more careful with the spare pot. once I get my real computer back I'll start puting up some photos of the resto

  7. #7
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    just make sure your top bearing section is good before you go to all the hassles of fitting the new ignition etc..

  8. #8
    Moderator Alien DNA's Avatar
    Join Date
    Jun 2010
    Location
    Melbourne, Australia
    Posts
    3,315
    Very interesting read... great work!!

  9. #9
    P Plater
    Join Date
    Jul 2011
    Location
    west australia
    Posts
    47
    ive found in the past when i havnt had a key if you smack the screwdriver realy hard it breaks the locking tag of the lock and the barrel comes out

  10. #10
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    Quote Originally Posted by green taxi View Post
    ive found in the past when i havnt had a key if you smack the screwdriver realy hard it breaks the locking tag of the lock and the barrel comes out
    thats nasty...you dont need to do that you can manipulate the lock out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Correct ignition barrel for 5/76 HJ sandy.
    By razsandman in forum Interior
    Replies: 8
    Last Post: 30-06-2015, 04:29 PM
  2. HEI Ignition Coils
    By rallyvan in forum Electrical
    Replies: 2
    Last Post: 28-03-2015, 01:34 PM
  3. 4 barrel manifold identification
    By Gunna Do in forum The Lounge
    Replies: 16
    Last Post: 24-03-2014, 09:47 PM
  4. V8 4 barrel air cleaner
    By Valencia in forum My Items For Sale or Buy
    Replies: 4
    Last Post: 11-08-2013, 11:53 AM
  5. Replies: 1
    Last Post: 28-06-2011, 11:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •