Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Retrim seats and exchange door trims 18v slate

  1. #1
    Administrator Jeza's Avatar
    Join Date
    Feb 2010
    Location
    Geelong, but ex-Sandgroper
    Posts
    240

    Retrim seats and exchange door trims 18v slate

    G'day all,

    I need to get new door trims and seats recovered. I want to go as close to original specs that I can in slate - 18v. Does anyone know of good motor trimmer and as reasonable cost? I've found Sydney based door trim exchange which will cost <$500 once allowing to post my metal tops and then postage of trims. Ive had a couple of quotes around $700 for seats covered - but not with weld? inserts, just sewn. I'm in Geelong but happy to travel to Melbourne. Cheers, Jez

  2. #2
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    Winner products south Australia

  3. #3
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Try this guy
    Tony All Trim
    tony 0488020841
    says he does good prices and a good job
    only draw back he doesnt do door trims only seats
    he might know somebody to get door trims for you
    its only a phone call
    cheers

  4. #4
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Quote Originally Posted by Glacier 73 View Post
    Try this guy
    Tony All Trim
    tony 0488020841
    says he does good prices and a good job
    only draw back he doesnt do door trims only seats
    he might know somebody to get door trims for you
    its only a phone call
    cheers
    Ps he is in lalor victoria

  5. #5
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    I have noticed with alot of retrimmed seats that they are not tight like the originals

  6. #6
    Night Rider Valencia's Avatar
    Join Date
    Jul 2011
    Location
    Perth
    Posts
    4,095
    Quote Originally Posted by adam perth View Post
    I have noticed with alot of retrimmed seats that they are not tight like the originals
    His claim to fame is he makes them fit like original trim

  7. #7
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Depends on who does them and what method they use. The trick is to make the covers small enough to fit, but only just.
    My mate does pretty close to factory style, but obviously by stitching, not the crappy welding that Holden used. He backstitches all flutes to make them stronger so they don't split after a while, plus backstitching is hidden, so you don't see any stitching, just the flute. Genuine Holden upholstery was pretty ordinary and irregular in stitching and shape, but better than a lot of other manufacturers.

    Doortrims are better made in a light plywood, than in the original stuff, as it stays in shape better. The steel tops can be attached the same way and then covered normally.

    I watch him doing seats and other stuff and it's amazing how it all comes together. He recovered 7 bicycle seats for me yesterday with offcuts he had laying around and they are incredible. Some people have talent.....
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  8. #8
    It's a rockin' Big Rob's Avatar
    Join Date
    Aug 2013
    Location
    Eurobodalla NSW South Coast
    Posts
    1,829
    Depends on who does them and what method they use. The trick is to make the covers small enough to fit, but only just.
    My mate does pretty close to factory style, but obviously by stitching, not the crappy welding that Holden used. He backstitches all flutes to make them stronger so they don't split after a while, plus backstitching is hidden, so you don't see any stitching, just the flute. Genuine Holden upholstery was pretty ordinary and irregular in stitching and shape, but better than a lot of other manufacturers.

    Doortrims are better made in a light plywood, than in the original stuff, as it stays in shape better. The steel tops can be attached the same way and then covered normally.

    I watch him doing seats and other stuff and it's amazing how it all comes together. He recovered 7 bicycle seats for me yesterday with offcuts he had laying around and they are incredible. Some people have talent.....
    Vans.... This is the 2nd time round the block, 40 years later! talk about turning back the clock!

  9. #9
    Forum Mum jennie285's Avatar
    Join Date
    Apr 2010
    Location
    Parkes Central West NSW
    Posts
    2,464
    Eastern auto upholstery bayswater Melbourne, but you need to go there personally, with the door trim tops (Metal pieces) or phone Phil Bartolo who will arrange it through them and gets a better result Phil's number is 0415134689. They are the best about, he does the chrome inserts as per gmh I think he told me he got gmh tooling from them when they no longer used them. The downside of him he is busy and doesn't get back, we have persevered with him as he does a great job. But Phil's business is around the corner and gets a quicker result, Phil specialises in rare parts etc. and we met him at the Sydney all Holden day
    Hope this helps Jennie
    HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
    HZ Madeira Red Windowless sandman now Sold to Bigrob
    HX Mandarin Red Sandman Ute finished, and club registered
    1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
    Married to RodneyHZ253

  10. #10
    It's a rockin'
    Join Date
    Aug 2011
    Location
    SA
    Posts
    1,067
    why hasnt anyone asked big rob what he is going to do with 7 bicycle seats? is that so you can have 7 people in the back of your van legally?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB HZ door trims
    By dm6666 in forum My Items For Sale or Buy
    Replies: 3
    Last Post: 15-06-2014, 02:11 PM
  2. WTB HZ door trims
    By dm6666 in forum My Items For Sale or Buy
    Replies: 0
    Last Post: 09-04-2014, 01:28 PM
  3. Repro Door Trims
    By Blocker in forum The Lounge
    Replies: 58
    Last Post: 31-12-2011, 06:22 PM
  4. Door trims
    By Rus in forum Interior
    Replies: 10
    Last Post: 14-09-2010, 11:06 PM
  5. Door trims
    By Blocker in forum The Lounge
    Replies: 8
    Last Post: 17-08-2010, 11:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •