yes you have to remove the top pot to release the ignition actuation bar...and also the key and barrell..
yes you have to remove the top pot to release the ignition actuation bar...and also the key and barrell..
Ok, here's a question
how do you fit it when the steering wheel and main shaft want to come out of the steering column on a column shift auto WB?
Not too sure what you mean.... The steering shaft is coming out of the column with the wheel still firmly attached?
If that's the case you've got one of a couple of issues: The top part of the colapsable shaft has come adrift or the top bearing has come adrift and/or the lower part of the steering shaft is no longer firmly attached to anything. That is from the info you've given, is the spring and circlip in place at the top of the steering shaft just below the splines?
Could you give a bit more info, possibly a photo as well?
Dave.
Nunc est bibendum...
yep, shaft is still attached to the wheel
will get a pic monday
Ok, been offline for a few weeks while i move
Fitted my power steer and looks like i need to replace my column - can i fit any column shift auto column from HX to WB?
Old thread i know but i am the stage of putting my column back in the Torana, some great information about the column and pulling it apart, wish i had found it earlier when i did pull mine to bits.
This is also another thread linked to this one. http://www.mysandman.com.au/forums/s...eering-columns
Is the HQ/J coffeepot the same as the LH Torana manual and if so has anyone got a good pot they would like to part with, the bearing in mine has
been pulled out at some stage by a previous owner and the boss has been flogged out bit so it has a bit of play.
RIng Oz up, he will sell and freight you one.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks