Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47

Thread: Dual fuel tanks - anyone tried it?

  1. #1
    Moderator Alien DNA's Avatar
    Join Date
    Jun 2010
    Location
    Melbourne, Australia
    Posts
    3,315

    Dual fuel tanks - anyone tried it?

    Just saw a great pic on facebook of this set up. Great idea...anybody tried this? Pretty keen to add this to the 'to do' list in my build I would even hazzard a guess to make the van more balanced as it has even weight distribution!!!



    Thats a pic of the street/custom van Street Legal btw
    Last edited by Alien DNA; 27-04-2013 at 08:48 PM.

  2. #2
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    With that engine it probably needs twin tanks just to make the distance between servo's.

  3. #3
    Moderator Alien DNA's Avatar
    Join Date
    Jun 2010
    Location
    Melbourne, Australia
    Posts
    3,315
    Yeah probably Only drama is the exhaust id imagine. Mufflers take up a bit of room underneath

  4. #4
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Just poke em out the sides instead.

  5. #5
    Moderator Alien DNA's Avatar
    Join Date
    Jun 2010
    Location
    Melbourne, Australia
    Posts
    3,315
    True that!!

    Another pic.......jag diff forces you to go out the sides


  6. #6
    Sandman Driver
    Join Date
    Mar 2011
    Posts
    553
    A mate had twin tanks on his Van. But changed it to be gas now instead of the other tank.

  7. #7
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    I've thought of doing this, it'd increase the capacity from 70.4L to 140.8L.

    My main thing was that I wanted to keep it looking original by only having one filler point/fuel cap. That makes it hard to link both tanks together. The only way that I could work out how to do it was to make a custom tank that become one peice (joined over the top of the tailshaft..) - (then there is the safety issue of the tank being punctured in the event of a crash) By not being able to connect the tanks at their lowest point, it would then mean that both sides of the tank would need their own electric pump and inbuilt sump to empty each side of the tank.
    It'd have to be set up in a way that one pumps until it a sensor senses that side of the tank is low, and then the other side would cut in.

    Its a lot of stuffing around just for double the fuel capacity..

    I didn't think about it too much, but there'd be another way to do it...
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  8. #8
    Cruiser Dick61's Avatar
    Join Date
    Sep 2012
    Location
    Warragul, Vic
    Posts
    345
    Quote Originally Posted by 83 WB_Ute View Post
    I've thought of doing this, it'd increase the capacity from 70.4L to 140.8L.

    My main thing was that I wanted to keep it looking original by only having one filler point/fuel cap. That makes it hard to link both tanks together. The only way that I could work out how to do it was to make a custom tank that become one peice (joined over the top of the tailshaft..) - (then there is the safety issue of the tank being punctured in the event of a crash) By not being able to connect the tanks at their lowest point, it would then mean that both sides of the tank would need their own electric pump and inbuilt sump to empty each side of the tank.
    It'd have to be set up in a way that one pumps until it a sensor senses that side of the tank is low, and then the other side would cut in.

    Its a lot of stuffing around just for double the fuel capacity..

    I didn't think about it too much, but there'd be another way to do it...
    I am not sure what you are talking about. Just plumb the tanks to a Tee piece before the fuel pump. Unless you are running an aftermarket fuel set up or a later injected motor, you don't need to over think it. Unless of course the WB runs an electric fuel pump, I always thought they were the same as real Holdens and had a mechanical pump on the side of the motor.
    HQ Glacier White Belmont Ute
    Wanted Lanspeed accessories for Holden Grey engines, twin carb manifolds, extractors, rocker cover, 3 speed floor shift.

  9. #9
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    That might be the chassis of an old 70's show van.

  10. #10
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    Quote Originally Posted by Dick61 View Post
    I am not sure what you are talking about. Just plumb the tanks to a Tee piece before the fuel pump. Unless you are running an aftermarket fuel set up or a later injected motor, you don't need to over think it. Unless of course the WB runs an electric fuel pump, I always thought they were the same as real Holdens and had a mechanical pump on the side of the motor.
    The WB does have a mechanical pump on the side of the motor. Yes, plumbing them to a 'T' peice before the pump would work, but not if you only wanted one filling point/fuel cap.

    If you had a filler cap on each side, they could be run as independant tanks straight to the fuel pump. However, me being me, I'd like to make it look as original as possible hiding the modifications....
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dual Fuel conversion
    By Doug in forum Engine
    Replies: 48
    Last Post: 08-10-2013, 08:15 AM
  2. Ebay dual cab
    By hj308 in forum Vehicles or Items Found for Sale
    Replies: 1
    Last Post: 24-11-2012, 08:45 PM
  3. thoughts opinions dual cabs
    By 1BadVan in forum The Lounge
    Replies: 24
    Last Post: 27-08-2012, 09:05 AM
  4. HJ dual cab!!!!
    By Alien DNA in forum The Lounge
    Replies: 11
    Last Post: 24-11-2011, 03:18 PM
  5. Anybody ever had there gas tanks tested?
    By abncraig in forum The Lounge
    Replies: 2
    Last Post: 01-04-2010, 12:21 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •