turbo 400 slip yoke

[XX7SANDMN]

does a turbo 400 yoke fit a trimatic v8 tailshaft if so are they the same uni joints thanks for any advice

[HK1837]

Depends. If it is a 1-tonner the unis are the same. Otherwise the V8 trimatic uses a 1" cup uni, TH400 uses 1.125" cup. You can buy an adapter uni to do the job, but the TH400 is a shorter tailshaft anyway so I suspect it still won't do what you want.

[george]

hello it should fit if you have a statesman or a tonner tailshaft if not you may have to get yourself a cross over uni no. is ruj 2034 cheers

[XX7SANDMN]

thanks guys i thought so anyone in perth got one for sale suit ute van wgn statesman cheers

[HK1837]

Try Adam here first, if not Greg at Classicozwreck can freight fron NSW. Make sure you specify 308 TH400 tailshaft suit ute, van, wagon or Statesman. You don't want 350 TH400 tailshaft as these have a big rear uni too.
George only about 4.5 years of Statesman (plus HQ with 350) had big front uni. The other almost 9 years of Statesman production used the smaller 1" uni.

[adam perth]

i normally ask $180 for a T400 ute / van / T400 statsman tailshaft with yoke. i have a few.....

if your picking at swap meets etc these tailshafts are dk green