Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Drivers side wiper pivot.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator Taily's Avatar
    Join Date
    Oct 2011
    Location
    NW Sydney
    Posts
    1,185

    Drivers side wiper pivot.

    Bolting the (as yet unfinished and still in primer) HJ back together for our move to Sydney in a couple of weeks with work and noticed that in the past 18 months the ute has sat in the shed not being driven that the drivers side wiper arm pivot seems to have stiffened up pretty badly to the point that it will only move freely through about 30 degrees of its arc, getting very stiff anywhere outside that and not moving beyond around 70 degrees (which I think from memory was its total arc anyway). I tried soaking it overnight in a jar filled with WD40, which did help smooth it down a bit but cannot get it to run smooth without starting to bind badly near the ends of its normal movement. It is that bad when it is installed that with the wiper motor running it causes a knocking noise at the motor as the shaft is pushed backwards and forwards as it tries to overcome the binding pivot.

    Questions are: Has anyone had a pivot out of the car and can verify that it will spin freely (which I am pretty sure it should, just like the left hand side one does), and (this reflects more upon the fact I recently lost a full hardrive of irreplaceable data I had built up over 25 years as I had scanned a lot of my old manuals into electronic format) are the drivers side pivots all the same part number HQ-WB (my 3/75 had a presslite motor/pump) or can they be at least modded to accept the attaching boss to suit the standard HJ arms)?

    Hoping some of the dismantlers here might have an idea or wish to sell me a pivot...

    Regards,

    Dave.
    Nunc est bibendum...

  2. #2
    Super Moderator Taily's Avatar
    Join Date
    Oct 2011
    Location
    NW Sydney
    Posts
    1,185
    Getting around to putting this back together soon. Does anyone have one they'd like to sell or has anyone ever gotten adventurous enough to drill out one of the welds and pulled one apart? If so, which weld did you drill out and did it work?

    I did grab one off ebay but when it showed-up it was completely flogged out... bummer.

    Any ideas anyone?
    Nunc est bibendum...

  3. #3
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    They should be pretty free to move. I've never looked that close. The ones from my parts car are on GTS' green van now. Might have some floating around in the many boxes of random parts but that requires digging around a dusty shed an hour from home so won't be a quick excercise.

  4. #4
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    F@#K mmeeeeeeee they are a total bitch to get off! i dont think anyone would have one laying around unless they cut the cowl with a grinder to get it out...

    my experience is that they are supposed to move a lot and very freely
    BQZ

  5. #5
    Cruiser
    Join Date
    Jan 2013
    Location
    Nth nsw
    Posts
    297
    Not sure what you mean but drivers side pivot is removed by three 5/16 or1/4 bolts under the dash remove the outside air (black with cable)unit first two screws then you should see it

  6. #6
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Quote Originally Posted by Cocko750 View Post
    Not sure what you mean but drivers side pivot is removed by three 5/16 or1/4 bolts under the dash remove the outside air (black with cable)unit first two screws then you should see it
    Noooo thats salt in the wounds... i didnt even think to take the duct/blanking plate off
    BQZ

  7. #7
    Super Moderator Taily's Avatar
    Join Date
    Oct 2011
    Location
    NW Sydney
    Posts
    1,185
    Appreciate the help guys very much. I have removed the wiper mechanism/arms from the ute as I have finally gotten around to painting it (Cucko, that is exactly how they come out, cheers mate) and yeah the passenger side is beautiful and smooth but the drivers side (the one with the relay pin) is the crook one.

    Might have some floating around in the many boxes of random parts but that requires digging around a dusty shed an hour from home so won't be a quick excercise.
    Nelan, I'd be stoked if you had one you could spare/swap for a decent carton/bottle of something or other to personal taste... I'm not in any hurry if it works with whatever you're up to/doing.

    Dave.
    Nunc est bibendum...

  8. #8
    Leadfoot HZSanFan's Avatar
    Join Date
    Aug 2012
    Location
    Broken Hill
    Posts
    139
    I will be taking one out of a car on the weekend you can have. PM your details and I will send it next week. Cheers

  9. #9
    Cruiser
    Join Date
    Feb 2010
    Posts
    404
    The ones I got from Nelan were a bit tight as well. I simply gave them a spray with some Yield and now they are as smoth as silk. Thanks again Nelan.

  10. #10
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by GTS View Post
    The ones I got from Nelan were a bit tight as well. I simply gave them a spray with some Yield and now they are as smoth as silk. Thanks again Nelan.
    Not too surprising. The front end of that car was pretty much hidden under a large bush and the grass around it was pretty high when I dragged it out of the yard I got it from. God knows how long it had been there. Canberra car though so still didn't have any rust in the cowls

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HJ Panelvan pivot point
    By locodriver2007 in forum The Lounge
    Replies: 7
    Last Post: 20-04-2015, 07:42 PM
  2. Wanted drivers side door chrome handle HX
    By Davestown in forum My Items For Sale or Buy
    Replies: 2
    Last Post: 25-03-2015, 07:45 PM
  3. WTB drivers side kingswood door trim
    By tup39 in forum My Items For Sale or Buy
    Replies: 18
    Last Post: 31-08-2014, 03:07 PM
  4. Special WB? Drivers side 3rd door ambo
    By V8VAN in forum Vehicles or Items Found for Sale
    Replies: 2
    Last Post: 03-12-2013, 09:52 PM
  5. Top tailgate lock pivot. after market
    By razsandman in forum Paint & Panel
    Replies: 5
    Last Post: 11-08-2011, 01:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •