Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Reproduction Sandman Full Length Hoodlining Bows and Rear Retaining Strip.

  1. #1
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957

    Reproduction Sandman Full Length Hoodlining Bows and Rear Retaining Strip

    Good news. They are done.
    Ok.
    Here are some prices for those interested.

    Complete kit:
    2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
    2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
    Enough screws to fix the small bows including pics of locations etc.
    4 x plastic plugs to go in the side pannel holes to hold the bows
    2 x Side pannels cut to size and pre drilled for the bow holes. These are to be welded to side of the van. Will come with photos of originals to help position.
    1 x Rear strip lazer cut same shape as the originals. Bent up as per originals also. This is to be welded or screwed to the rear.
    1 x CD full of pictures to help you get everything right.
    $250 + freight. $230 + freight for mySandman.com.au Members.

    Bows on their own. (this is ok if you have an original sandman and all the side pannels and rear strip are still attatched.
    2 x large bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
    2 x smaller bows. Bent up as originals. Made from spring steel to keep them nice and stiff.
    Enough screws to fix the small bows including pics of locations etc.
    4 x plastic plugs to go in the side pannel holes to hold the bows.
    $150. + freight $140 + freight for mySandman.com.au Members.

    Anyone that is interested please contact me here. Or email at jason@stickthisdecals.com.au or pick up the phone 0427110502. (I will ring back if I dont answer as im a busy man ;))

    We are also looking at doing the hoodlinings to go with them.

    Cheers
    Jason
    Last edited by stickthis; 13-07-2010 at 12:14 AM.
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  2. #2
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    Quote Originally Posted by stickthis View Post
    The rear strips are lazer cut from .55mm zinc sheet. And bent up as originals.
    That will be fun to try and weld in..... Why Zinc?
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  3. #3
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    The Zinc material that they are being made from is the same gear used when you do a patch repair for fix rust etc. It welds ok. Will spot weld fine also if you wanted to do it this way.

    I was thinking zinc would be best. But maybe that would put people off. Can do it from black no worries if its thought to be a better option?
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  4. #4
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Are you going to make them so it is clear that they are not genuine? Just so it is clear that if they are put in a non sandman? The headlining strip I mean.

  5. #5
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937
    I don't use zinc sheet for any repairs on vehicles as it is more "brittle", tends to spatter when welding and gives off noxious fumes, I only use panel steel or cut patch pieces out of unuseable vehicle panels.... bonnets are a favorite and damaged ones are cheap from the wreckers.

    wbute, if you are going to repro something you try to repro it exactly as original.... it is easy enough to cut one from a Kingswood van and weld it into a non Sandman or even just use the complete Kingswood body shell so I wouldn't be too worried about someone trying to fake a Sandman by using a reproduction headlining strip.... once the headlining is fitted you can't see the strip anyway and I doubt a seller is going to allow you pull the headlining down to check whether it is faked or geniune. There are also genuine Sandmans that have had the strips removed during customising so a welded on strip does not necessarily mean the Sandman is a fake.

    As Sandmans gain popularity you just need to do your homework when looking to buy one the same as you would for any collector car...
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  6. #6
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Just curious, not picking holes or anything.

  7. #7
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    The strips will be 99% correct. meaning 99% of people will not be able to tell the differance.

    Sean. I am under the impression "panel steel" has a type of zinc coating. Its not zinc as such its zincanneal. Which Im lead to believe is what is used for panel steel?
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  8. #8
    Forum Mum jennie285's Avatar
    Join Date
    Apr 2010
    Location
    Parkes Central West NSW
    Posts
    2,464
    Quote Originally Posted by Absinth View Post
    .

    wbute, if you are going to repro something you try to repro it exactly as original.... it is easy enough to cut one from a Kingswood van and weld it into a non Sandman or even just use the complete Kingswood body shell so I wouldn't be too worried about someone trying to fake a Sandman by using a reproduction headlining strip.... once the headlining is fitted you can't see the strip anyway and I doubt a seller is going to allow you pull the headlining down to check whether it is faked or geniune. There are also genuine Sandmans that have had the strips removed during customising so a welded on strip does not necessarily mean the Sandman is a fake.

    As Sandmans gain popularity you just need to do your homework when looking to buy one the same as you would for any collector car...
    When we were buying our yellow van we asked all sorts of questions to fastlane (Byron) as to whether it was geniune, the hoodling clip which wasn't welded in later was one of the things which helped convince (Dandenong build so no XX7 on ID plate) us it was a sandman, and the courtesy light...and the chipped paint from the door sills revealed blackouts under the thick coat of yellow over the top.....
    Not trying to dispute putting in hoodling clips, but understand where WBute is coming from with this.....

  9. #9
    Decal Demon stickthis's Avatar
    Join Date
    Feb 2010
    Location
    SA
    Posts
    1,957
    I agree I understand this. As said anyone that wanted to look correctly and do thier research correctly will know that my repros are repro. Not factory. But to the naked eye they will be.

    Its all about how the strip is welded in also.

    Cheers
    Jason
    Owner (Jason) - STICKTHIS Automotive Decals and Stripes

    HX Sandman Panelvan. Mint Julep. Complete Factory Resto.
    HZ Sandman Ute. Saddle Tan Metallic - Customised. Galaxy Blue.
    HZ GTS. Palais White. Next Resto From 99% NOS Parts.
    HSV GTO Coupe - Highly Modified
    VR SS into a VS Supercar Castrol Perkins Ingall 1997 Tribuilte build

  10. #10
    Sandman Driver mook's Avatar
    Join Date
    May 2010
    Posts
    744
    What about the side strips?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rear hoodlining clips
    By hilta in forum The Lounge
    Replies: 4
    Last Post: 11-05-2015, 10:43 PM
  2. Van full headliner bows...
    By Big Rob in forum Interior
    Replies: 4
    Last Post: 13-09-2013, 11:45 AM
  3. Full length hood lining trade...
    By cafiem in forum Archive
    Replies: 7
    Last Post: 25-05-2012, 08:21 PM
  4. fitting full length headling
    By hzvan in forum Interior
    Replies: 0
    Last Post: 26-06-2010, 04:37 PM
  5. Pano Full Length Headlining.
    By stickthis in forum Interior
    Replies: 4
    Last Post: 27-05-2010, 10:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •