Ignition Removal HZ

[hj308]

Is the removal and replacement of ignition barrel straight forward for a HZ, have seen a few explanations given when I google it but curious of any wisdom from this forum, cheers

[Innuendo]

Remove steering wheel, Indicator switch, Insert key and turn it to ACC. Place a wide flat blade screwdriver in the "slot" and press down whilst giving the key a jiggle and pull out.
Some may need the slot cleared of diecast first.

[george]

thats exactly right , loosen the screws for the blinker dipper switch ,pull and move to the side ,then get a flat blade screwdriver making sure first to have ignition key in the on position ,push blade in to slot and jiggle lock out.and make sure the new one goes in the position as the old one .no dramas unless you don't have a key.

[adam perth]

search "steering columns explained" on here under the search featurethere is an excellent thread by OZBOX