Screw in Cheviot centre caps

[79Z33L]

G'day all, I'm looking for a full set of five screw in centre caps in either of the below styles to suit 14" Hotwire mags:

Either these oval caps
Img_0712.jpg

Or this style of round caps
$(KGrHqF,!isE-j60SbgHBP7yu131ig~~60_35.JPG

If anyone can point me in the right direction, I would greatly appreciate it.

Cheers, Evan.

[Maysik]

Try Lugnutking on Ebay.

[buck]

these are bloody hard to find a full set that the prongs are not broken, i got a set last year, they cost me about $130, but some people are charging a lot more upto $250.

[79Z33L]

Lugnutking on ebay has drawn a blank for what I'm after. I'm specifically after the 5 point screw in ones, rather than the clip in ones or the push through types.

[Innuendo]

Don't think Cheviot/CSA ever did the screw on versions. More likely Aunger or Performance branded.
Cheviot was an '80's re-branding by Mullins wheels. I could be wrong but...

[79Z33L]

Innuendo, I thought so myself too, but I have sitting in the tray of my HZ two 14x7 Hotwires with 5 small screw holes around the wheel centre, and "Cheviot" cast clear as day on them. The other three are the more common clip in variety.

[thatotherguy]

you can buy alloy ones somewhere in melb $250 a set i will see if i can find it, try typing HQ wheels on ebay

[79Z33L]

You can see here the two styles I have.
556315_4975197650475_1204829547_n.jpg
561580_4975197730477_1097728584_n.jpg

I'll try that. Thanks thatotherguy

[Innuendo]

Hmm, possibly done after the fact?

Is it your preference to have screw on style or are you just trying to cover the existing holes?
You could always fill the screw holes with liquid metal.
I "might" have some screw hole caps but not Cheviot brand and I'm not sure of I have a full set.

[79Z33L]

I doubt that these have been modified. There's no depression in the edge of the hub that would allow the push in type to locate and no signs of the depression being welded up and machined smooth either.