Hi
Looking at changing the wb wiring to suit the twin front lights.
What is needed to Converting the wb front lights to the Hz twin light front.
Cheers jaft
Hi
Looking at changing the wb wiring to suit the twin front lights.
What is needed to Converting the wb front lights to the Hz twin light front.
Cheers jaft
Have changed the front to be twin light front. rad support panel nose cone.
Inturn i have to change the wiring of the wb lights to now suit the Hz twin light.
Cheers jaft
Can't you just get a HZ twin front harness?
If not then you basically need to separate your wires so that the high beam for the middle lights is spliced off the other headlight plug. You probably want a high beam relay if you're modifying another wiring harness.
Not sure if you want to try it , but i've just put HID on my WB and its brilliant (no pun intended ) , cost about $300 , might be seen as a waste with a WB , but , very happy with it. Still have a set of Rally 4000's to keep an eye out for the bush creatures though..
When you say twin light front do you mean the 2 headlight front or quad headlight front? If you mean quad just make up some patch harnesses for each light for low beam and drive a relay off one side to power high beam, getting power straight from the battery via an inline fuse.
Attachment 7264
Cheers JAFT
Quad headlight front. Twin is the one with two!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks