Results 1 to 6 of 6

Thread: Adjusting WB Door Windows..

  1. #1
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487

    Adjusting WB Door Windows..

    I am having a bit of trouble trying to get the passenger side window on my ute adjusted correctly..

    It is very strange, when you wind the window down it works perfectly and follow the track/groove right down. However when you go to wind it up it starts in the channel and gets to a certain point where it pops out of the groove and won't wind up..

    I have put a new window winder in, and that made it 10 times better than the original winder (which basically wouldn't wind up at all..

    I have tried adjusting it in every way and have not had any success..

    Should I try it with a spare window and see how that goes??? if that doesn't work then I have no idea.. lol

    I might have to get some pics and put them up here.. That might help abit..
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  2. #2
    It's a rockin'
    Join Date
    Aug 2011
    Location
    SA
    Posts
    1,067
    where does it pop out ? and is it tight to wind up ?

  3. #3
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    id be loosening all the bolts off for the winder and hold the glass right up hard with the winder wound up then tighten the bolts, that might fix it, becasue itll be set with the glass inside the bit its meant to, all the windows ive got that dont work/ jump out have either got the front arm bit bent or adjusted to low while the back high or vise versa, if you get what i mean??

  4. #4
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    Quote Originally Posted by thatotherguy View Post
    where does it pop out ? and is it tight to wind up ?
    Its not tight, and it pops out on the back side about a quarter of the way up..

    Quote Originally Posted by V6HQUTE View Post
    id be loosening all the bolts off for the winder and hold the glass right up hard with the winder wound up then tighten the bolts, that might fix it, becasue itll be set with the glass inside the bit its meant to, all the windows ive got that dont work/ jump out have either got the front arm bit bent or adjusted to low while the back high or vise versa, if you get what i mean??
    Cool, will give that a go ans see what happens.. Its probably my fail at not adjusting it correctly.. lol I got the drivers one working good though..
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  5. #5
    It's a rockin'
    Join Date
    Aug 2011
    Location
    SA
    Posts
    1,067
    they can be hard to adjust or something might be bent.on my sons prem we had to pack one of the slides with washers to get the window to go up straight and i had a similar problem with my torrie but i just kept adjusting until it was right

  6. #6
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    Quote Originally Posted by thatotherguy View Post
    they can be hard to adjust or something might be bent.on my sons prem we had to pack one of the slides with washers to get the window to go up straight and i had a similar problem with my torrie but i just kept adjusting until it was right
    Cool, I'll have a go and see how I go with it..
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HZ GTS dash clock adjusting knob and screw
    By Monman71 in forum Interior
    Replies: 18
    Last Post: 22-12-2014, 11:49 PM
  2. new windows
    By thatotherguy in forum Paint & Panel
    Replies: 2
    Last Post: 06-03-2013, 11:39 PM
  3. Another Adjusting Problem on my WB!!!
    By 83 WB_Ute in forum Driveline
    Replies: 35
    Last Post: 22-12-2012, 09:58 AM
  4. HQ Windows
    By mauser in forum Paint & Panel
    Replies: 7
    Last Post: 28-10-2011, 05:27 PM
  5. Windows
    By jennie285 in forum Archive
    Replies: 3
    Last Post: 20-10-2011, 07:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •