Adjusting WB Door Windows..

[83 WB_Ute]

I am having a bit of trouble trying to get the passenger side window on my ute adjusted correctly..

It is very strange, when you wind the window down it works perfectly and follow the track/groove right down. However when you go to wind it up it starts in the channel and gets to a certain point where it pops out of the groove and won't wind up..

I have put a new window winder in, and that made it 10 times better than the original winder (which basically wouldn't wind up at all..

I have tried adjusting it in every way and have not had any success..

Should I try it with a spare window and see how that goes??? if that doesn't work then I have no idea.. lol

I might have to get some pics and put them up here.. That might help abit..

[thatotherguy]

where does it pop out ? and is it tight to wind up ?

[V6HQUTE]

id be loosening all the bolts off for the winder and hold the glass right up hard with the winder wound up then tighten the bolts, that might fix it, becasue itll be set with the glass inside the bit its meant to, all the windows ive got that dont work/ jump out have either got the front arm bit bent or adjusted to low while the back high or vise versa, if you get what i mean??

[83 WB_Ute]

where does it pop out ? and is it tight to wind up ?

Its not tight, and it pops out on the back side about a quarter of the way up..

id be loosening all the bolts off for the winder and hold the glass right up hard with the winder wound up then tighten the bolts, that might fix it, becasue itll be set with the glass inside the bit its meant to, all the windows ive got that dont work/ jump out have either got the front arm bit bent or adjusted to low while the back high or vise versa, if you get what i mean??

Cool, will give that a go ans see what happens.. Its probably my fail at not adjusting it correctly.. lol I got the drivers one working good though..

[thatotherguy]

they can be hard to adjust or something might be bent.on my sons prem we had to pack one of the slides with washers to get the window to go up straight and i had a similar problem with my torrie but i just kept adjusting until it was right

[83 WB_Ute]

they can be hard to adjust or something might be bent.on my sons prem we had to pack one of the slides with washers to get the window to go up straight and i had a similar problem with my torrie but i just kept adjusting until it was right

Cool, I'll have a go and see how I go with it..