Results 1 to 9 of 9

Thread: HX & HZ Sandman blackouts

  1. #1
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960

    HX & HZ Sandman blackouts

    Just wondering if anyone has any detailed photo's of where the blackouts go on the HX & HZ vans?
    What i mainly need is:

    a) Where they go on the body behind the doors
    b) How far up the rear guards do they go
    c) Where abouts they go when near the rear bars on the sides

    Thanks in advance
    BO6 = Rarer then a Sandman

  2. #2
    Just a note on sill blackouts, the factory black out lines are actually slightly higher than that of the sill seam. This is done to hide the shadow gap created under the doors. So if you were to run a tape line from the underside of the door edge you should be pretty right. It does look weird if you just go from the sill seam.

    If you look at the pic below you'll see what I mean.

    sandman 006.jpg
    Last edited by sandmanowners; 02-04-2012 at 08:09 PM.

  3. #3
    Approx 10mm above sill line.
    rust-cut-out-rear-drivers-sill.jpg

  4. #4
    Attachment 4936
    Attachment 4937
    Attachment 4938
    Attachment 4939
    Attachment 4940
    Attachment 4941
    Attachment 4942
    Attachment 4943
    Attached Images Attached Images
    Last edited by sandmanowners; 02-04-2012 at 09:04 PM.

  5. #5
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Thanks for that.
    I didn't realise about the sill stripes - HANDY INFO
    UNFORTUNATELY the pics in post #4 can't be seen.
    BO6 = Rarer then a Sandman

  6. #6
    Did that work ?

  7. #7
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    That's better..
    Thanks
    BO6 = Rarer then a Sandman

  8. #8
    I went through all my files and found those few cars with original paint still on them. The rear quarter blackout starts behind rear wheel same height as sill blackout and runs up to where the corner of the bumperette starts. Blackouts wrap around lips on wheel arches. HX only has nosecone blackout, HZ doesn't as it has the air dam. B pillar blackout is hard to explain! finishes close to where the curve meets the flat....

  9. #9
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Thanks for your help.
    It's greatly appreciated. :cheerful: :cheerful:
    BO6 = Rarer then a Sandman

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hz Sandman window blackouts etc..
    By Dark1 in forum The Lounge
    Replies: 2
    Last Post: 26-06-2015, 09:34 PM
  2. Front Blackouts HX Sandman
    By Grunt in forum Paint & Panel
    Replies: 7
    Last Post: 05-06-2015, 05:19 PM
  3. HQ Sandman Blackouts
    By hqhzvans in forum The Lounge
    Replies: 5
    Last Post: 23-09-2014, 06:46 AM
  4. blackouts for a sandman
    By sandman 78 in forum Paint & Panel
    Replies: 0
    Last Post: 28-05-2013, 06:55 PM
  5. HZ Sandman Ute Blackouts
    By mrsandman in forum Paint & Panel
    Replies: 1
    Last Post: 16-03-2011, 06:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •