Results 1 to 8 of 8

Thread: Reverse light problem

  1. #1
    Cruiser cafiem's Avatar
    Join Date
    Feb 2011
    Location
    Queensland formally of ACT Formally of NT.
    Posts
    201

    Reverse light problem

    Here we go again...

    I've managed to figure out most of the electrics so far but I am stumped with the reverse lights.
    To give you some idea of what I'm dealing with... It looks like the previous owner had trouble with the headlight switch ( had melted when a twin headlight front was fitted without a relay by the looks of it ) so instead of fitting a new headlight switch he has wired up some weird complicated 2nd switch under the dash where the wires are just twisted together. How it didn't catch fire I'll never know. Thankfully he has been thoughtful enough to use the same coloured wire everywhere
    ( Please note the level of intended sarcasm in the previous sentence )
    Anyway I have found the reverse switch. One end has 12v with ignition on which is right I think but the other end goes to a single plug and then no-where.
    I obviously can't just wire the power from the switch to both rear blinkers because then they'll just be hazzard lights when I use the blinkers.
    I have a wiring diagram but can't seem to trace the right wires.

    Hopefully someone can help me with:
    Does the car just put power to both rear blinkers as reverse lights?
    and if so:
    Where do I pick up the blinker wires so that I can put power to both of them in reverse and still have them work independently when they are blinkers?

    The other option is to mount a clear light at the baack and just re-wire it.

    Thanks again for any help I can get.
    Nah, I'm just driving around looking for someone with licence.

  2. #2
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Sounds like you need to throw the wiring harness in the bin and find a decent harness to me. The last butcher has gone a bit far.

  3. #3
    Cruiser cafiem's Avatar
    Join Date
    Feb 2011
    Location
    Queensland formally of ACT Formally of NT.
    Posts
    201
    I think I'm on top of it now but I did think of that, in fact if I'd found another one I probably would have by now.
    Nah, I'm just driving around looking for someone with licence.

  4. #4
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    Get another harness as wb says. The reverse light wires come up into the blinker mech in the column.

  5. #5
    Cruiser cafiem's Avatar
    Join Date
    Feb 2011
    Location
    Queensland formally of ACT Formally of NT.
    Posts
    201
    Are they dark green / light green?
    I'll have a look for a harness but it'll be pretty much impossible for me here.
    What's the go with the GTS dash and door lights?
    Nah, I'm just driving around looking for someone with licence.

  6. #6
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Contact Greg at classic oz wreck. He should be able to hook you up with a harness.

  7. #7
    Cruiser cafiem's Avatar
    Join Date
    Feb 2011
    Location
    Queensland formally of ACT Formally of NT.
    Posts
    201
    Thanks,
    Was going to have a look around Tennant tomorrow and will if I don't do any good there.
    HJ is the only one with the square coupling thing right?
    What happens with the dash?

    thanks again,[COLOR="Silver"]
    Nah, I'm just driving around looking for someone with licence.

  8. #8
    Cruiser cafiem's Avatar
    Join Date
    Feb 2011
    Location
    Queensland formally of ACT Formally of NT.
    Posts
    201
    Scored a good one today - about half as many wires as the one in the car now but twice as many of them actually go somewhere.
    Nah, I'm just driving around looking for someone with licence.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 308 Lifter Problem
    By chrisp in forum Engine
    Replies: 14
    Last Post: 21-03-2013, 11:13 PM
  2. Stuck in Reverse!
    By JackHopkins in forum Driveline
    Replies: 16
    Last Post: 22-06-2012, 04:26 PM
  3. WB Clutch Problem...
    By 83 WB_Ute in forum Driveline
    Replies: 23
    Last Post: 12-04-2012, 05:48 PM
  4. Gears positions, where is Reverse???
    By Sarah in forum The Lounge
    Replies: 6
    Last Post: 12-06-2011, 11:04 PM
  5. reverse lights muncie 4 speed
    By abncraig in forum Electrical
    Replies: 2
    Last Post: 12-07-2010, 10:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •