Just wondering if you swap a standard kingswood wb dash to gts dash if the wiring plugs are the same or modication to the wiring loom is required?
Just wondering if you swap a standard kingswood wb dash to gts dash if the wiring plugs are the same or modication to the wiring loom is required?
Driver -1981 WB kingswood 253 4 speed
Weekend- AC Cobra replica 302ho(425hp) 4 speed toploader
Project Complete- SLR 5000 LH mock up(next door Neighbors)
never late in a 5.0 litre
You need the gts dash harness to go with the dash. This plugs into the standard wiring plug. You will need the senders to match the gauges as well. Simple as.
Going from memory they are the same (ie HZ GTS dash versus WB sports dash), dash and dash harness wise. However the cabin harness is different, 2 x differences that I can remember being reversing lights and coil voltage.
Just get a wb gts dash then its all the same.
Same thing, that is what I was getting at. Instruments and dash harness will interchange.
when you talking about the harness, is that the one that plugs into the warning lights in the centre of the dash and ones that come off the speedo and fuel/tempreture guage.
Driver -1981 WB kingswood 253 4 speed
Weekend- AC Cobra replica 302ho(425hp) 4 speed toploader
Project Complete- SLR 5000 LH mock up(next door Neighbors)
never late in a 5.0 litre
Yep.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks