Balance of Genuine GM Holden and after-market parts left for sale

[ADR 27a]

Hi everyone,
I just wanted to try and post a list of the balance of the car parts that I still have left if anyone is interested.
As previously mentioned, they were to suit either my old HX Sandman or my dads old HZ SLE Statesman.
And thanks to everyone who replied previously and bought things off me, I hope you enjoy them.






Genuine GM Holden (NOS) car parts for sale


• HQ - WB Bonnet Lacing seal rubber (2) Price $35.00 each
• GM Holden Battery retaining clamp kit (1) Price $65.00
• HJ - HZ Single Headlight rims (2) Price $140.00 the pair (plus 6 retaining screws)


• HJ - HX - HZ dash mounted Louvered Vent outlets (3 short + 1 long) Price $280.00 set of 4
• Chromed plastic Door Lock strikers and small bezels (2) Price $25.00 the pair

• Windscreen wiper arm – Rubber Pivot Seal (1) suit HQ –WB Price $5.00
• Exhaust pipe Centre - Hanger Rubber (suits all LX Torana and H series Holden) Price $15.00
• Panelvan or Utility – rear leaf spring Shackle Bushes (13) Price $20.00

• A – Shape Bonnet rubber cushions (8) Price $12 .00
• Round Bonnet rubber stops (4) Price $6 .00

• Genuine GM Holden - PCV Valve (1) Price $20 .00
• HZ Rear sway Bar rubber pivot bushes (2) Price $12 .00
• HX early (push linkage) Manual transmission – clutch linkage rubber bushes (8) Price $10.00

• HQ - HJ - HX - HZ - WB
Panel Van and Utility (Both upper/lower Rear Tailgate and Window glass) Rubber Seals
Price - $ 170.00 for bundle of all three items









Aftermarket Mechanical Bits

• Radiator Caps (2) Price - $6.00 each
• QH Water Pump Holden V8 (1) Price - $55.00
• Holden V8 Thermostats (4) Price - $10.00 each
• Thermostat Housings (2) Price - $35.00 each

• Various small - Heater Hoses to suit (3) Price - $15.00 the set
• NSK Thrust Race Bearing (to suit M series gearbox) Price - $30.00
• Bosch Spark Plugs to suit Holden V8 (11) Price - $40.00
• Bosch Condenser - GB535 Price - $15.00

• Universal Joints to suit – Holden with Manual Transmission (3) Price $30.00 each
• Universal joint to suit Holden with - Turbo-Hydro auto (1) Price $40.00
Note:
The Holden manual transmission used two standard universal joints, whereas the Turbo-Hydro automatic transmission used one heavy duty joint on the gearbox end, and one standard universal joint down near the differential end. The four universal joints shown will make 2 full sets.

• HQ – HZ - TRW Holden Idler Arms Price $35.00 each (may fit WB)
• HQ – HZ -Drivers Door Weather Shields (2) Price - $70.00 each


• Macnaught K26 Flexigun – Cartridge grease gun - Price $85.00 (was $129.00 new)
(new in box and never used)




Other Genuine GM Holden Parts



• HZ SLE Statesman Rear Boot Lid Chrome Moulding (2) and Genuine GM Retaining Clips to suit. Price - $ 145.00 each

• HZ SLE Statesman Side Protector Strip Mouldings and Retaining Clips –
Price - $1200.00 for all 10 strips and clips

• Various HJ - HX - HZ Sedan and Statesman Door and Window Chrome Mouldings
Price - $ 480.00 for all 12 pieces = ($40.00 each piece) negotiable

……………………………………………………………………………………………………………………

Aftermarket Bits

• Two pairs of Monroe-Wylie GT 130 Shock Absorbers Price - $ 280.00 for both sets

• K-Mac front and rear Sports Anti - Sway Bars Price - $ 295 .00 for both sets and various hardware

[jennie285]

i would be interested in the mudflaps, x 2 sets....

[V6HQUTE]

• Chromed plastic Door Lock strikers and small bezels (2) Price $25.00 the pair

• Windscreen wiper arm – Rubber Pivot Seal (1) suit HQ –WB Price $5.00

• A – Shape Bonnet rubber cushions (8) Price $12 .00
• Round Bonnet rubber stops (4) Price $6 .00

interested in the above mainly the last 2, is the wiper arm the actual thing or just a rubber bush, do you have any photos of the chromed door strikers im not sure if its the part im thinking off or not

[hxbunny]

G'day,

How are the tailgate seals i.e. have they gone brittle or hardened up, or have creases in them from storage.

Cheers Mark

[ADR 27a]

Hi Mark,
The two tailgate rubbers and rear window rubber are all still sealed in the original GM packaging but have been kept away from any direct sunlight or elements.
I have some pictures of them on Gumtree.com.au for you to see them.
If you type in the same as on the parts list or just copy and paste in the search it should show them.
They all look and feel as supple as from new and have no tight kinks or bends in them.
Any problems I can send you some pictures.
Daryl

--- Updated ---

It is only the rubber seal around the base of the wiper pivot, and the chromed parts are the two buttons and bezels for the door locks.
Daryl.

--- Updated ---

Hi Guys,
Hope you had a safe trip back home with all this bad weather up here now.
If you could email me at daryljw@bigpond.com i can organise these for you.