Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: GTS Dash Clock

  1. #1
    P Plater Sndman77's Avatar
    Join Date
    Feb 2010
    Location
    Rockhampton, QLD
    Posts
    83

    GTS Dash Clock

    Hi, I was just wondering if anyone had much to do with repairing these clock's. I have 2 yellow clock and 3 white clock that need repairing, I check in the http://holdenpaedia.oldholden.com/Repairing_Dash_Clocks and had a go myself. Nearly had one going, but really need to give it to someone who is a specialist at repairing these clocks. Does anyone know of a good place to send them or give me some advice.

    Bill
    Don't Come Knocking If This Van's Rocking

  2. #2
    Night Rider Blocker's Avatar
    Join Date
    Feb 2010
    Location
    Behind the keyboard.
    Posts
    3,166
    Absinth will be the man to give you advice on these.

  3. #3
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    they never work..ive sold hundreds of gts dashes over the years..i cant remember the last time i saw one that was working....change the internals to quartz movement is the best...
    otherwise ...nemisis gauges in newcastle would fix them...

    personally i dont want to know what time it is so my clocks if i have one in a van never works..:lol:

  4. #4
    Wish my worked!

  5. #5
    Sandman Driver HZSandman's Avatar
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    665
    mine works but the humming drives me nuts so I unplugged it again.

    Went slow anyway.

  6. #6
    Ozbox, ref changing it to quartz workings how do I go about doing this?

    cheers.

  7. #7
    Leadfoot hjsandman's Avatar
    Join Date
    Feb 2010
    Location
    ballarat victoria
    Posts
    116
    Quote Originally Posted by Sndman77 View Post
    Hi, I was just wondering if anyone had much to do with repairing these clock's. I have 2 yellow clock and 3 white clock that need repairing, I check in the http://holdenpaedia.oldholden.com/Repairing_Dash_Clocks and had a go myself. Nearly had one going, but really need to give it to someone who is a specialist at repairing these clocks. Does anyone know of a good place to send them or give me some advice.

    Bill
    hi Sandman77

    The clock in my HZ GTS Monaro did not work and I had an instrument guy in Ballarat replace the internal works with those out of a VB Commodore Clock. He said the VB clocks were a really good qaulity.(apparently german made and sourced from Opel GM's Europe arm)The only negative was it slightly moved the position of the adjustment arm in the face.(no one's ever picked this up) He kept the origianl GTS face, and fitted the GTS arms on the VB clock.It works fine and keeps time perfectly.
    I'm sure there are people doing different things but this worked in my case.

    cheers Rob.:lol:

  8. #8
    Super Moderator Absinth's Avatar
    Join Date
    Feb 2010
    Location
    Junee, NSW
    Posts
    1,937


    I've got six clocks and only two of them work. The mechanical part of the clock seems to be OK but the electronic part seems to bugger up on them, it is a very small PC board with capacitors, resistors and diods on it. I have swapped one from a working clock to a non-working clock but it didn't fix the problem...

    I am currently trying to get a PC board rebuilt and see if this makes any difference. Using the workings from a VB Commodore clock is a good option but as said the adjustment knob is in a different position and the ticking will drive you crazy if you are ever sleeping in the van when camping... My old van had the VB Commodore clock workings in it and I ended up fitting a on-off switch to it which I mounted under the dash.
    4/75 HJ XX7 Sandman Panelvan ... Persian Sand currently restoring
    7/76 HX Monaro 4dr 308 4sp... Absinth Yellow and rusty as hell.. SOLD
    3/77 HX Sandman Panelvan ... Absinth Yellow and rusty as hell .. SOLD

    http://www.44gpw.info/sandman-decalssmall2.jpg

  9. #9
    Gas On
    Guest
    Gday,

    Everybodys right about the hi-frequency humming driving you bonkers!

    Cheers

  10. #10
    Hj Sandman,
    How much did they charge you to convert?


    Quote Originally Posted by hjsandman View Post
    hi Sandman77

    The clock in my HZ GTS Monaro did not work and I had an instrument guy in Ballarat replace the internal works with those out of a VB Commodore Clock. He said the VB clocks were a really good qaulity.(apparently german made and sourced from Opel GM's Europe arm)The only negative was it slightly moved the position of the adjustment arm in the face.(no one's ever picked this up) He kept the origianl GTS face, and fitted the GTS arms on the VB clock.It works fine and keeps time perfectly.
    I'm sure there are people doing different things but this worked in my case.

    cheers Rob.:lol:

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Repairing GTS clock
    By wbute in forum Interior
    Replies: 34
    Last Post: 18-04-2021, 06:29 PM
  2. HZ GTS dash clock adjusting knob and screw
    By Monman71 in forum Interior
    Replies: 18
    Last Post: 22-12-2014, 11:49 PM
  3. Hz gts clock repair
    By Monman71 in forum Electrical
    Replies: 1
    Last Post: 18-03-2014, 02:22 PM
  4. GTS clock screw
    By Monman71 in forum The Lounge
    Replies: 0
    Last Post: 24-12-2013, 03:19 PM
  5. gts clock
    By JackHopkins in forum The Lounge
    Replies: 1
    Last Post: 11-07-2010, 10:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •