Hj Kingswood Sandman Rebuild

[tup39]

Found another pair of pillar trims on ebay with 5 days to go also. Will try and post the link...

here

Cool thanks for that,still looking for one so will bid on these

[Absinth]

Geeze, they look good! I'd kill to be able to easily find some 64V ones.

reproduction Gazelle vinyl is due to be available next year according to Tony all trim at the all Holden day recently... Here's hoping he's correct.

Cool thanks for that,still looking for one so will bid on these

make sure they are metal ones for HJ.... HX and HZ were plastic.

[Taily]

reproduction Gazelle vinyl is due to be available next year according to Tony all trim at the all Holden day recently... Here's hoping he's correct.

Sweet! That reminds me I haven't checked back with that fella I asked to get that trimmers number for you.

make sure they are metal ones for HJ.... HX and HZ were plastic.

Plastic! I didn't know that! Thanks for pointing it out.

[tup39]

reproduction Gazelle vinyl is due to be available next year according to Tony all trim at the all Holden day recently... Here's hoping he's correct.



make sure they are metal ones for HJ.... HX and HZ were plastic.

Didn't know there were plastic ones either,found out these are stainless.

Cheers

[Nocturne]

^^ there's a mix up here. The inner A pillar trims are the metal / plastic items; the outer B pillar (Kingswood) trims are the stainless items(hard to get :( )

Great looking Ute too!

[Absinth]

Nocturne is correct, sorry guys I thought you were talking about the inner trims.

[HK1837]

Hopefully he does both Gazelle and Fawn or there will be a lot of HJ Sandman van owners unhappy if he only does Gazelle!

[Absinth]

Only Gazelle as far as I know... Better than nothing though and closer than using tan... No gazelle headlining though.

[mook]

Nocturne is correct, sorry guys I thought you were talking about the inner trims.

Are the inner trims for WB shorter, I tried fitting some hq ones and didn't have any luck.

[Taily]

Are the inner trims for WB shorter, I tried fitting some hq ones and didn't have any luck.

HQ had a different shaped dash pad (etc) so my best guess is that is why they wouldn't work with a later type dash.