Page 3 of 23 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 224

Thread: Hj Kingswood Sandman Rebuild

  1. #21
    Leadfoot tup39's Avatar
    Join Date
    Mar 2010
    Location
    Adelaide Hills
    Posts
    172
    Thanks for the comments,got some photos of the vn diff conversion i done,will be good to have 4 wheel disc

    011.jpg
    Attached Images Attached Images

  2. #22
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    done the same thing in my hq, mainly to get 3:08 ratio cause i was having trouble finding a sals one, have you got new axles to suit hq, or changing to commodore, i got new axles made, there chrome moly, which is apparently what goes into 9" or somthing like that, meant to be good, got them for the same price as steels because the shop had no steels, what brake booster are you using, vn or 1" hz/wb? mine looks just like your last photo atm awaiting on the body to be finsihed

  3. #23
    Leadfoot tup39's Avatar
    Join Date
    Mar 2010
    Location
    Adelaide Hills
    Posts
    172
    Quote Originally Posted by V6HQUTE View Post
    done the same thing in my hq, mainly to get 3:08 ratio cause i was having trouble finding a sals one, have you got new axles to suit hq, or changing to commodore, i got new axles made, there chrome moly, which is apparently what goes into 9" or somthing like that, meant to be good, got them for the same price as steels because the shop had no steels, what brake booster are you using, vn or 1" hz/wb? mine looks just like your last photo atm awaiting on the body to be finsihed

    I want to get axles to suit hq still looking for a place to do it as for brake booster i am going with a wb one... where you get your axles done

  4. #24
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    i got mine done a dubbo diff and drive line, just the local shop, were $300 a axle, chrome moly were meant to be 600 each, i doubt my little old commy motor would break them , are you having trouble finding a place? just said to the blokes wanted commy axles but in hq stud, the disk rotar needed the centre bored out a touch, local machinest/welder did that on the lathe

  5. #25
    Leadfoot
    Join Date
    Mar 2011
    Location
    Dubbo
    Posts
    97
    Quote Originally Posted by tup39 View Post
    Thanks for the comments,got some photos of the vn diff conversion i done,will be good to have 4 wheel disc

    011.jpg

    Maybe a diff conversion tutorial for the newbs i.e me???
    Black WB bodied HZ panelvan with a 400 chev called Frankie :nerviness:

    Aquarious HX windowless Kingswood project.

  6. #26
    Leadfoot tup39's Avatar
    Join Date
    Mar 2010
    Location
    Adelaide Hills
    Posts
    172
    I'll have to pull my finger out next time i go down town,what you do with your tailshaft and yoke????

  7. #27
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    i think ill use sals yoke, with v8 tailshaft, but ive got to get the other end changed to suit the commodore 5spd box

    --- Updated ---

    Quote Originally Posted by HX76King View Post
    Maybe a diff conversion tutorial for the newbs i.e me???
    wasnt real hard, just cut off the vn mounts, except sway bar, and cut some mounts of a banjo, welded a jig to the bench using the sals then put the commy one it set it all up the same, weld, job done, hardest bit was setting it up in the jig will be heaps easier to get parts if need be, the wreckers has got heaps of commies, hey just noticed your from dubbo too

    --- Updated ---

    btw commy diffs are 15mm skinnier, 7.5 each side, if i remember correctly(correct me if im wrong), but there was stuff all difference between it and a sals

  8. #28

  9. #29

  10. #30
    Forum Mum jennie285's Avatar
    Join Date
    Apr 2010
    Location
    Parkes Central West NSW
    Posts
    2,464
    I have just read that you live at Roxby, our daughters boyfriend is about to go there for 3 months to Olympic dam, is that close to you....? he is doing Chemical engineering at Uni and part of his course is going to a mine site for hands on experience...
    HZ Jasmine Yellow Windowless Sandman, now being driven everywhere and is finished!
    HZ Madeira Red Windowless sandman now Sold to Bigrob
    HX Mandarin Red Sandman Ute finished, and club registered
    1979 HZ malachite windowless van with 308 5spd, all chromed up and shiny finished and named "The Player"
    Married to RodneyHZ253

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. HZ Sandman rebuild- Firethorn Red
    By sslx76 in forum HZ Sandman
    Replies: 68
    Last Post: 22-02-2015, 02:01 PM
  2. HQ kingswood sandman?
    By kerry park in forum HELP... Is This a Sandman?
    Replies: 4
    Last Post: 05-02-2015, 02:48 PM
  3. Kingswood or Sandman
    By HX Luke in forum The Lounge
    Replies: 4
    Last Post: 12-04-2013, 04:33 PM
  4. Nice rebuild thread of a Sandman from '07/08
    By mauser in forum The Lounge
    Replies: 6
    Last Post: 19-04-2012, 07:53 PM
  5. 253 rebuild
    By wayne g in forum Engine
    Replies: 3
    Last Post: 03-07-2010, 12:08 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •