Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Help!!!! WB Seat Identification

  1. #1
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487

    Help!!!! WB Seat Identification

    Hi guys, I have bought these seats. The only reason I bought them was because I was told they are WB.... and they were only $50 for the pair...

    Here are some pics.


    They came with these steel brackets bollted top the actual seat mounts. Are these original??? I think not... :(


    Under those brackets there are the mounts fixed to the frame of the seats.


    The steel brackets had 4 holes drilled into them... 2 for the actual seat mounts... and the other 2 for the WB floorpan...

    It does not look good... Considering the seat brackets (on the frame) are to short... :(

    Anyways here are the measurements.
    2 inner holes: 22cm (from middle of hole to middle of hole)
    2 outer holes: 28.5cm (from middle of hole to middle of hole)

    The smaller hole on the steel brackets (back) is 5mm across from middle bolts, and the big hole (front) is 1cm across from the middle holes.

    I hope I made this as clear as I can.

    Any help???
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  2. #2
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    I reckon they are commodore seats. Good luck finding WB commercial seats as they are rare as rocking horse poo. It is probably only the seat rails that are different between those commodore seats and WB. WB Stato have the height adjuster so different as well.
    You have picked the hardest parts to find I reckon. Seats and then the bucket seat seat belt storks, console lid.

  3. #3
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    Quote Originally Posted by wbute View Post
    I reckon they are commodore seats. Good luck finding WB commercial seats as they are rare as rocking horse poo. It is probably only the seat rails that are different between those commodore seats and WB. WB Stato have the height adjuster so different as well.
    You have picked the hardest parts to find I reckon. Seats and then the bucket seat seat belt storks, console lid.
    I have no idea... but I got told that if you have first gen commodore seats, they would fit WB floorpans... apparently they have the same mounting points, and same floorpans....

    --- Updated ---

    Well, just did some research... Looks like I have first gen commodore seats... and all I have to do is get a set of WB runners (Ute or Statesman) and fit them to the seat... and then it should fit....

    Is this correct??? also has anybody done this before (just for some tips on how to fit the new runners)???

    EDIT:
    Also, if anyone has a set of WB runners (to suit bucket seats) from a ute or statesman... and wants to sell them, please post here or send me a PM.
    Last edited by 83 WB_Ute; 21-09-2011 at 06:54 PM.
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  4. #4
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    Yes, definitely Commodore seats. You can put WB runners onto them. From memory the cushion and base is the same but WB backs are different. I have 2 x pairs here I have kept but only one set of runners, I used the other set in my HZ Overlander on VK Calais seats.
    I do remember that the actual runners are similar, they have outriggers welded onto them to pick up the WB floor holes. Note that WB floor nuts/holes are in different places than HQ-HZ for the innermost holes.

  5. #5
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    As I said they are commodore and they are wrong runners. You will have a 1 in a million chance of finding wb commercial seat runners. Stato ones may work. I used VH buckets in my WB and just made brackets like the ones on the seats you have.

  6. #6
    Sandman Driver 83 WB_Ute's Avatar
    Join Date
    Sep 2011
    Location
    Northern NSW
    Posts
    487
    Quote Originally Posted by HK1837 View Post
    Yes, definitely Commodore seats. You can put WB runners onto them. From memory the cushion and base is the same but WB backs are different. I have 2 x pairs here I have kept but only one set of runners, I used the other set in my HZ Overlander on VK Calais seats.
    I do remember that the actual runners are similar, they have outriggers welded onto them to pick up the WB floor holes. Note that WB floor nuts/holes are in different places than HQ-HZ for the innermost holes.
    Rightio. Whats the difference between the backs??? is it major???

    PM sent.

    --- Updated ---

    Quote Originally Posted by wbute View Post
    As I said they are commodore and they are wrong runners. You will have a 1 in a million chance of finding wb commercial seat runners. Stato ones may work. I used VH buckets in my WB and just made brackets like the ones on the seats you have.
    Yeah, anything to find to fit a commercial with buckets is really hard...
    Cheers,
    Matt

    My WB Ute Build:
    http://www.mysandman.com.au/forums/s...te-Shed-Thread

    My HZ Sandman Panelvan Replica:
    http://www.mysandman.com.au/forums/s...nelvan-Replica


    WHERE ARE YOU BHZ29069A!?!?!?

  7. #7
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    Quote Originally Posted by wbute View Post
    You have picked the hardest parts to find I reckon. Seats and then the bucket seat seat belt storks, console lid.
    do you mean the arm rest/lid? a lot squarer than hz etc

  8. #8
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Yeah. If you have one or know of one let me know.....

  9. #9
    Sandman Driver V6HQUTE's Avatar
    Join Date
    Sep 2011
    Location
    Dubbo Central west nsw
    Posts
    837
    Quote Originally Posted by wbute View Post
    I used VH buckets in my WB
    vh seats are comfy, would 83 wb utes seats pass rego etc with the rail adaptors?

    --- Updated ---

    Quote Originally Posted by wbute View Post
    Yeah. If you have one or know of one let me know.....
    yep,in the shed

  10. #10
    Sandman Driver Rico's Avatar
    Join Date
    May 2011
    Location
    Benalla Victoria
    Posts
    519
    Hmmm, makes me wonder now. I reckon the seat I have are probably Commodore as well. A mate of mine fitted VH SL/E seats into his HZ. Will ask him.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gts rim identification
    By ozbox in forum Ozbox's Workshop
    Replies: 7
    Last Post: 23-10-2011, 01:43 PM
  2. HZ Panelvan Identification
    By Rokvan in forum HELP... Is This a Sandman?
    Replies: 2
    Last Post: 23-05-2011, 03:46 PM
  3. Give Away. HZ bench seat + HQ bench seat.
    By razsandman in forum Archive
    Replies: 1
    Last Post: 30-12-2010, 01:31 PM
  4. hj van identification
    By kaido17 in forum The Lounge
    Replies: 1
    Last Post: 01-10-2010, 11:04 PM
  5. Identification corrections
    By Blocker in forum Holden Sandman Q&A
    Replies: 14
    Last Post: 01-03-2010, 07:07 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •