Page 1 of 2 12 LastLast
Results 1 to 10 of 22

Thread: hz wiper motor

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    P Plater hzvan's Avatar
    Join Date
    Mar 2010
    Location
    canberra
    Posts
    43

    hz wiper motor

    I am having abit of trouble with my wiper motor
    it does not work at all
    i have checked it has earth and one of the 4 wires going in has 12 volts to it
    but can not work it out
    any help would be good
    thanks steve

  2. #2
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    steve..the hq to wb series of wiper motors are the biggest pos since the eh wiper motor..problem is they are in a position that allows them to get wet and the water goes inside to the bottom where the bearing is and they seize..another problem is that because they dont get used they seize as well..
    a tip for all is to use your wiper motor on a regular basis wether its raining or not..especially run them after washing the car.
    if you are in need of a second hand one i sell good tested working for $95 or rebuilt for $195..usually this is on an exchange basis but for mysandman humans i will do them outright no exchange at this price.

  3. #3
    P Plater hzvan's Avatar
    Join Date
    Mar 2010
    Location
    canberra
    Posts
    43
    Thankyou for that info and your prices
    I know were to get one if the one i found today in the shed stops
    The motor that would not work was a lucas, that looked in good condition
    On the out side but it got the better of me and i pulled it a part
    All the copper wire is burnt out and there was a little copper arm broken of under
    The plastic gear
    I had a preslite one that i put on and worked but stops were ever when turned off
    As i have not driven van in 8 years i cant remember if the wipers should return to bottom of windscreen
    Could someone please give me a yes or no on that
    Thankyou
    Steve

  4. #4
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Yep, return to bottom.

  5. #5
    P Plater hzvan's Avatar
    Join Date
    Mar 2010
    Location
    canberra
    Posts
    43
    so what can i do to the motor to get them to return to the bottom of the screen when turned of?

  6. #6
    Sandman Driver RodneyHZ253's Avatar
    Join Date
    May 2010
    Location
    Parkes Central West NSW
    Posts
    718
    Have you got the earth stap from the motor body to the fire wall .the return home relies on contacts to the under side of the large cog .I do think the motor would work because it gets it earth via the switching. therefore if the motor is not earthed the return home can not work .that's my take anyway.
    Last edited by jennie285; 20-08-2011 at 08:30 AM.

  7. #7
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    I will say from memory, preslite, (with flat plate & no washer pump or hose fitting) on it.

  8. #8
    Thanks Max mine does have a preslite but has hose fittings on it

  9. #9
    Sandman Driver maxsandman's Avatar
    Join Date
    Aug 2014
    Location
    country N.S.W.
    Posts
    624
    Dont just rely on my geriatric memory!
    My 12/76 HX (which Im fairly confident is original) is preslite with washer pump on it, & a couple of 78 HZ's I have (one is definately original) are the later motor with no washer pump, it may have changed over at start of HZ, or might have been phased in when the earlier ones with the pump were used up.
    I would just be happy with a wiper motor that works!
    & check out cars at shows etc, to make a more educated decision

  10. #10
    Night Rider Innuendo's Avatar
    Join Date
    Aug 2012
    Posts
    3,448
    HZ according to GMH Parts Catalogue has blanking plate (no pump) on either LUCAS or PRESLITE.

    holden_hz_wiper_motors.jpg
    Last edited by Innuendo; 29-11-2021 at 12:24 AM.
    Selling HJ 253 Engine
    Engine Number QR718*** | 19M5 Clock Casting at 6 O'Clock
    19th December 1975 Suit HJ Late Dec 1975 to April 1976

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wiper dwell
    By L31 Sandman in forum The Lounge
    Replies: 23
    Last Post: 28-02-2017, 07:55 PM
  2. WTB - HJ X Z wiper arm pivots
    By GTS in forum My Items For Sale or Buy
    Replies: 5
    Last Post: 29-08-2013, 03:24 PM
  3. Wiper Arm question
    By GTS in forum Electrical
    Replies: 1
    Last Post: 10-08-2011, 11:26 AM
  4. Lucas Wiper Motor
    By GNW1974 in forum Electrical
    Replies: 0
    Last Post: 02-06-2011, 04:15 PM
  5. WTB - HJ wiper motor
    By GTS in forum Archive
    Replies: 4
    Last Post: 14-01-2011, 08:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •