Tips on order of restoring the van

[we wreck xx7s only]

in order that i recommend nowaday when someone enters our shop;

1. pick up phone
2. arrange appointment with bank
3. see how much you can get as in finance if you are not cashed up
4. scour all forums and put feelers out
5. find something done, that others have completed and done an amazing job on, even if it is way above your budget that you thought you were going to spend on your own rebuild(it soon blows out)
6. give them the cash
7. grab a bargain
8. turn key
9. enjoy immediately and if it bothers you to what others say as in "ohh thats ozbox's old van(sorry for using you as an example)you bought", simply make some subtle changes
10. sell off your van and be stress free!!
11. drive on and on and on, not forgetting the monthly repayments, that will be way less stressful thatn listening to beaters, trimmers, engine builders, ebay sellers saying everything is rare...

[ozbox]

onya frank...i must agree but.

[jennie285]

in order that i recommend nowaday when someone enters our shop;

1. pick up phone
2. arrange appointment with bank
3. see how much you can get as in finance if you are not cashed up
4. scour all forums and put feelers out
5. find something done, that others have completed and done an amazing job on, even if it is way above your budget that you thought you were going to spend on your own rebuild(it soon blows out)
6. give them the cash
7. grab a bargain
8. turn key
9. enjoy immediately and if it bothers you to what others say as in "ohh thats ozbox's old van(sorry for using you as an example)you bought", simply make some subtle changes
10. sell off your van and be stress free!!
11. drive on and on and on, not forgetting the monthly repayments, that will be way less stressful thatn listening to beaters, trimmers, engine builders, ebay sellers saying everything is rare...

Trust me that is probably a good idea.....

[GTS]

in order that i recommend nowaday when someone enters our shop;

1. pick up phone
2. arrange appointment with bank
3. see how much you can get as in finance if you are not cashed up
4. scour all forums and put feelers out
5. find something done, that others have completed and done an amazing job on, even if it is way above your budget that you thought you were going to spend on your own rebuild(it soon blows out)
6. give them the cash
7. grab a bargain
8. turn key
9. enjoy immediately and if it bothers you to what others say as in "ohh thats ozbox's old van(sorry for using you as an example)you bought", simply make some subtle changes
10. sell off your van and be stress free!!
11. drive on and on and on, not forgetting the monthly repayments, that will be way less stressful thatn listening to beaters, trimmers, engine builders, ebay sellers saying everything is rare...

If we all did that then no more vans/utes would get restored and they would end up at the crusher.

Most of the positive advice given so far is on the money. I did a body off resto on my van and rego is now so close I can almost smell the paint on the number plates.

When I stripped my van down I took pics of EVERYTHING and they proved to be invaluable when it came to pieceing it back together.....and a GMH spare parts book helps as well.

Do what you can with the cash available at the time. When the cash temporarily runs out start cleaning stuff and painting or polishing....that costs bugger all. When you save up a bit more cash go get the bits you need to make some progress. It's taken me 2 1/2 years so far and I can see the light at the end of the tunnel.......and I know it's not someone holding a torch.

If the van has heaps of rust then go do a welding course at your local TAFE and learn a skill for life. I learnt, on the run, from my panel beater mate and in no time I was cutting chunks out of the body and welding in new stuff. It saved me heaps of $'s.

The trick to the whole process is be consistent and persistant. I made a point of doing at least one hour on the van per night ( which usually turned into 3 or 4) otherwise nothing gets done, although winter slows things down a bit because it's too cold in the garage at night so most of the work is done on the weekend at the moment.....but I do work on it every weekend. At the end of each week you will be able to see where you've been then before you know it you'll be ready for primer or putting the body back on or fitting the drive train....whatever.

I didn't worry too much about what the van was going to be worth when it's finished.....thats not why I built it. The short version is that I built it simply because I wanted one. I don't mean that in a smart arse kind of way.....but that is the basic truth of the matter. I could have spent months trying to find a Sandman that had been restored and forked out a heap of cash for it.....but, in all probability, would still have had to spend more cash on it to get it the way I want it because I'm almost certain nobody would have built one the way I wanted. I was going for the "off the showroom floor" look but without going to the "enth" degree of restoredness (new word for the dictionary)...also known as "rivet counting"

There is nothing more satisfying than sitting in the "pondering chair" out in the garage and looking at what I have achieved in 2 1/2 years compared to what I started with and how it got to be like it is.

Stick with it and save another van.

You can read about my adventure here... http://www.mysandman.com.au/forums/showthread.php?t=15

[playwme]

sitting in the "pondering chair" out in the garage

I've worn a few of those chairs out over the years.

[we wreck xx7s only]

If we all did that then no more vans/utes would get restored and they would end up at the crusher.

Most of the positive advice given so far is on the money. I did a body off resto on my van and rego is now so close I can almost smell the paint on the number plates.

When I stripped my van down I took pics of EVERYTHING and they proved to be invaluable when it came to pieceing it back together.....and a GMH spare parts book helps as well.

Do what you can with the cash available at the time. When the cash temporarily runs out start cleaning stuff and painting or polishing....that costs bugger all. When you save up a bit more cash go get the bits you need to make some progress. It's taken me 2 1/2 years so far and I can see the light at the end of the tunnel.......and I know it's not someone holding a torch.

If the van has heaps of rust then go do a welding course at your local TAFE and learn a skill for life. I learnt, on the run, from my panel beater mate and in no time I was cutting chunks out of the body and welding in new stuff. It saved me heaps of $'s.

The trick to the whole process is be consistent and persistant. I made a point of doing at least one hour on the van per night ( which usually turned into 3 or 4) otherwise nothing gets done, although winter slows things down a bit because it's too cold in the garage at night so most of the work is done on the weekend at the moment.....but I do work on it every weekend. At the end of each week you will be able to see where you've been then before you know it you'll be ready for primer or putting the body back on or fitting the drive train....whatever.

I didn't worry too much about what the van was going to be worth when it's finished.....thats not why I built it. The short version is that I built it simply because I wanted one. I don't mean that in a smart arse kind of way.....but that is the basic truth of the matter. I could have spent months trying to find a Sandman that had been restored and forked out a heap of cash for it.....but, in all probability, would still have had to spend more cash on it to get it the way I want it because I'm almost certain nobody would have built one the way I wanted. I was going for the "off the showroom floor" look but without going to the "enth" degree of restoredness (new word for the dictionary)...also known as "rivet counting"

There is nothing more satisfying than sitting in the "pondering chair" out in the garage and looking at what I have achieved in 2 1/2 years compared to what I started with and how it got to be like it is.

Stick with it and save another van.

You can read about my adventure here... http://www.mysandman.com.au/forums/showthread.php?t=15

yes, all very good advice indeed and way to go if you can do it, but the there will always be van and cars to restore, but if a van such as jennie jennies came up for sale, lets just say $50k was price asked(coz thats what it would cost to restore one to that quality, and i dont care who you are or what you do, but thats what it will cost, and thats minimul), and i had a van that i was thinking about restoring that needed $20k plus just for body and paint let alone everything else, i'd definitely jump on a ride like that, its smarter and easier, i see it everyday with my job, but thats me nowadays
also you will more more often than not find that ppl sell a quality restored car not just because they are over it or sik of it or need the money to pay bills, but they usually have another project or something to do with the cars they have, hence, another is saved anyways..

[HX76King]

Thanks for the awesome response. I might start with the rolling restoration and see how I go from there maybe just because I haven't done anything like this before.

I have come to grips of spending the money on a plain ol' kingy .

Id love to come out to Parks and check out your van some day.

Now off to get married ;)

[playwme]

Now off to get married ;)

Hmmm. I knew I'd forgotten one of my most important tips earlier. Might be a bit late to tell you that one now......

[mauser]

Now off to get married ;)

You are better of putting that off until you finish the van.


Mauser

[jennie285]

You are better of putting that off until you finish the van.


Mauser

His wife might be like me and love vans too...

--- Updated ---

Id love to come out to Parks and check out your van some day.

Now off to get married ;)

You are welcome anytime, come over and have a look at our show n shine on Sat 15th October 2012 and swap meet Sunday....