Page 1 of 10 123 ... LastLast
Results 1 to 10 of 100

Thread: HDT Replica Van

  1. #1
    Leadfoot rallyvan's Avatar
    Join Date
    Nov 2010
    Location
    Western Sydney
    Posts
    181

    HDT Replica Van

    After clearing a few other projects out of the way I have made a start on my HDT van project this weekend. A mate and I removed the front apron and rad support and pulled the motor and gearbox out of the parts van so I can start tidying bits and pieces up to insert in the good van. Will pull the diff out next weekend and list the rolling shell on Ebay.

    Empty Engine Bay 001.jpg

    Empty Engine Bay 002.jpg

    Empty Engine Bay 003.jpg
    Last edited by Blocker; 23-01-2013 at 08:23 AM.

  2. #2
    Learner Driver 308mate's Avatar
    Join Date
    Jul 2011
    Location
    Wootton, north coast NSW
    Posts
    22
    Sounds interesting dude...whats a hdt van??

  3. #3
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    i have the correct bull bar that you need for the replica. It would be very hard to find... u can have for $100, and thats mainly because i will have to drive around and take it to a depot and fill out con notes and its time consuming,
    "All correspondence must bear these numbers"

  4. #4
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    that would be one hard but to find for that replica..and expensive to replicate unless you have handy mates.

  5. #5
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    can one of you two buy it so i don't trip over it anymore..? OZ weren't you building a HDT replica van?, swap ya for a front LH WB stato wheel arch mould. lol
    "All correspondence must bear these numbers"

  6. #6
    Certifiable ozbox's Avatar
    Join Date
    Mar 2010
    Location
    newcastle
    Posts
    2,385
    yeh i was goin to but rallyvan wanted to do it more so i went on with other projects...left front,damned hard to find a nice one..ive got a few but i think most have damage down the bottom 2 inches at the front.

  7. #7
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    Quote Originally Posted by ozbox View Post
    yeh i was goin to but rallyvan wanted to do it more so i went on with other projects...left front,damned hard to find a nice one..ive got a few but i think most have damage down the bottom 2 inches at the front.
    ill probably end up buying a complete Wb stato just to get it, then wreck it out. you know...
    "All correspondence must bear these numbers"

  8. #8
    Sandman Driver Rico's Avatar
    Join Date
    May 2011
    Location
    Benalla Victoria
    Posts
    519
    Quote Originally Posted by 308mate View Post
    Sounds interesting dude...whats a hdt van??
    The Van in my Avatar. Its gunna look S*** hot when its done! This is one build I look forward to watching!

  9. #9
    Leadfoot rallyvan's Avatar
    Join Date
    Nov 2010
    Location
    Western Sydney
    Posts
    181
    308mate,
    The van I'm replicating was a Sandman that HDT rally team used to service and tow rally cars arround with in the late 70's-early 80's. So basicly a sign written Sandman with roof rack and bullbar. Adam I'll PM you regarding the bar as I have a mate in Perth that can do the leg work for me in regard to the running arround to freight depots. That would be a much easier option than sitting down and drawing the bullbar up and fabricating it myself.
    It will be something different in the service area compared to all the 4wd utes and old banger trucks that you usually get at a rally! Hopefully it will stir some of the old timers memory and they will tell a few stories about that period of rallying when the events where real adventures and the crews true characters!


    Anthony

  10. #10
    Learner Driver 308mate's Avatar
    Join Date
    Jul 2011
    Location
    Wootton, north coast NSW
    Posts
    22
    Wickid man! something different. bring it on ....
    cheers \m/

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Similar Threads

  1. HQ Sandman replica
    By shep in forum Replica Sandmans
    Replies: 8
    Last Post: 14-07-2015, 07:52 PM
  2. BIG $$$ for a Replica!!
    By HZSanFan in forum Replica Sandmans
    Replies: 45
    Last Post: 27-08-2014, 11:45 AM
  3. HQ Sandman ute replica
    By Absinth in forum Archive
    Replies: 15
    Last Post: 18-06-2012, 10:40 AM
  4. HX Van for a replica
    By mauser in forum Archive
    Replies: 9
    Last Post: 13-05-2012, 07:41 AM
  5. Replica
    By 78_HZ_UTE in forum Replica Sandmans
    Replies: 8
    Last Post: 05-03-2010, 01:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •