Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: removing leaf springs..??

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Sandman Driver hainzy's Avatar
    Join Date
    Apr 2010
    Location
    BALLARAT
    Posts
    699

    removing leaf springs..??

    Can anyone give me a reminder on the right order of things when removing the leaf springs. I did it once with a mate about 10 years ago and remember we had to do stuff in the right order..

    Is it something like:

    jack up the body
    undo shocks
    jack up diff/axle
    undo u bolt nuts and other bits
    undo shackle bolts....
    remove springs...

    Just cant remember if there was pressure on the support plates from the shocks etc. and what order we did it in.. Cheers.

  2. #2
    Night Rider Blocker's Avatar
    Join Date
    Feb 2010
    Location
    Behind the keyboard.
    Posts
    3,166
    That sounds about right and it was only 6 months ago that I did mine.









    Hope that helps?

  3. #3
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Will the shocks fully extend and "hold" the springs up when the wheels are off the ground? I usually undo shocks before jacking the body up on leaf spring vehicles.

  4. #4
    P Plater AN5590's Avatar
    Join Date
    May 2010
    Location
    Adelaide
    Posts
    97
    Quote Originally Posted by playwme View Post
    I usually undo shocks before jacking the body up on leaf spring vehicles.
    Agree - either that or jack-up the diff slightly to take the strain off the shocks and then remove them...

  5. #5
    Sandman Driver hainzy's Avatar
    Join Date
    Apr 2010
    Location
    BALLARAT
    Posts
    699
    Thanks guys. Prob gunna rip em out to get resprung in the next few weeks. Just had a new baby though so will get to it when the new mini boss allows... Cheers.

  6. #6
    It's a rockin' adam perth's Avatar
    Join Date
    Feb 2010
    Posts
    1,222
    when undoing or doing up the U bolts, ALWAYS do 3-4 turns on each one then stop and go onto the next one and torque them up / down evenly....

    otherwise you will crossthread them and bend the U bolt thread....
    "All correspondence must bear these numbers"

  7. #7
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by hainzy View Post
    Thanks guys. Prob gunna rip em out to get resprung in the next few weeks. Just had a new baby though so will get to it when the new mini boss allows... Cheers.
    Congratulations. Mine just turned 1 yesterday. I never knew 12 months could go so quick.

  8. #8
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    Quote Originally Posted by playwme View Post
    Will the shocks fully extend and "hold" the springs up when the wheels are off the ground? I usually undo shocks before jacking the body up on leaf spring vehicles.
    I dont think the shocks should be able to reach full extension when the wheels are off the ground. If your springs were able to reach full extension of travel just under the weight of the diff and wheels they would hardly cary the weight of the vehicle when it was on the ground?
    The hangers control the leaf spring travel and the shock is unrelated to the spring travel on leaf springs. If you look at a truck with stuffed springs the tell tale sign is the hangers going right over and touching the chassis. But they still can only travel to the limit of the hangers.

    Make sure you replace the center bolts while the springs are out!

  9. #9
    Learner Driver PHill.j's Avatar
    Join Date
    Mar 2012
    Location
    frankston
    Posts
    2
    Hi i was wondering if you can respray inbetween each spring or would that become a problem on travel after they are reassembled? I have them apart and striped down back to metal another opinion would be handy thanks:-)

  10. #10
    Good afternoon all; I'm after some advice from those in the know....

    I'm hoping to replace the shackles, rubbers and front bushes on the rear leaf springs.

    The shackles are easy enough on their own, but to do the lot I assume I have to have the axle on the jack, undo the shocks, brake hose, shackles and bushes, then lift the body high enough so the front of the spring clears the chassis?

    Also, I've heard that getting the bush out of the spring can be difficult?

    Thanks in advance for any advice!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Leaf springs or coils
    By thequeenslanders in forum Steering & Suspension
    Replies: 17
    Last Post: 23-01-2014, 01:42 AM
  2. Door hinge springs
    By hj308 in forum General Spare Parts
    Replies: 3
    Last Post: 28-04-2012, 08:33 AM
  3. Ironman load plus helper leaf spring
    By Alien DNA in forum Steering & Suspension
    Replies: 12
    Last Post: 28-02-2012, 09:41 PM
  4. springs
    By thatotherguy in forum Steering & Suspension
    Replies: 12
    Last Post: 26-09-2011, 08:23 PM
  5. leaf springs 1ton vrs standard springs hq van
    By b-rock-05 in forum The Lounge
    Replies: 11
    Last Post: 27-04-2011, 06:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •