you need the surrounds, body and lenses from a HZ. drill 4 holes on each side to take the surrounds. As Wb have 3 globes from memory you just cut out the reverse globe.
you need the surrounds, body and lenses from a HZ. drill 4 holes on each side to take the surrounds. As Wb have 3 globes from memory you just cut out the reverse globe.
Last edited by Vombil; 12-04-2012 at 04:23 PM.
BQZ
Ok sounds good I have the lens and the surrounds I just need the back. Then do the wiring and drill 4 holes. Thanks for the quick reply. :D
Black WB bodied HZ panelvan with a 400 chev called Frankie :nerviness:
Aquarious HX windowless Kingswood project.
What size diodes do I need to do this , I looked at Jaycar and there is lots of different ones.
there is an earth its on the body of the hz lights , globe housing pushes into tail light creating an earth.
hello , i also put led globes on the back tail lights very bright
i needed a one way diode for rear tail lights and a led blinker relay
works quite well .
george
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks