Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: HZ tail lights into WB

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630

    HZ tail lights into WB

    Hey guys my plastic housings in my WB are fried and cracked up so i thought it would be a good opportunity to put the better looking HZ lights in. Ive got all the bits off the donor HZ.

    I have no idea how the hell to wire them up though. Ive had a crack and its definately not working. WB has three globes indicator, reverse and tail/stop all with power and earth. HZ has two globes (brake/tail double filament -no earth) and indicator/reverse (only single filament-earthed through the repeater)

    If someone has done this conversion and can put me out of my pain it would be greatly appreciated!

  2. #2
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Easiest way to do it is to use 4 diodes (2 each light) and should take a novice about 1 hr to do the wiring part.
    BO6 = Rarer then a Sandman

  3. #3
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Cheers Agro i was thinking along those lines. do you know where to put them?

  4. #4
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Yeah mate, at the back next to the lights would be easier.
    BO6 = Rarer then a Sandman

  5. #5
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by agr071 View Post
    Yeah mate, at the back next to the lights would be easier.
    Nominated for most helpful post of the week

    I assume you mean which wires Vombil? You want them on every power wire going into the rear indicator bulbs. This stops the reverse lights from activating your front indicators and stops your indicators to cause all 4 lights left and right to flash.

  6. #6
    Just remember that Ur WB wont be roadworthy anymore without the addition of the small side lights..
    HJ XX7- L31-M21 sandman windowless
    HZ XX7- L31-M41 sandman ute
    1955 Chevy Belair
    1972 Hq Statesman original Wedgwood with black vinyl roof
    1956/9 Custom Pro street Pickup .. Blown 407 suicide doors tilt front ..
    1956 210 sedan
    1982 Wb windowless Panelvan ..
    1970 Ht Kingswood original 186

  7. #7
    Night Rider Vombil's Avatar
    Join Date
    Feb 2011
    Location
    Western Suburbs
    Posts
    2,630
    Quote Originally Posted by playwme View Post
    Nominated for most helpful post of the week

    I assume you mean which wires Vombil? You want them on every power wire going into the rear indicator bulbs. This stops the reverse lights from activating your front indicators and stops your indicators to cause all 4 lights left and right to flash.
    thanks for that playwme. yeah ive had a think about it and its become pretty obvious

    --- Updated ---

    Quote Originally Posted by vanman View Post
    Just remember that Ur WB wont be roadworthy anymore without the addition of the small side lights..
    yeah ive kept the wb stuff just in case. not gonna cut the repeaters into the 1/4's... cops here are a little slow with the technical stuff! cheers

  8. #8
    It's a rockin' agr071's Avatar
    Join Date
    Feb 2010
    Location
    Macksville area
    Posts
    1,960
    Quote Originally Posted by playwme View Post
    Nominated for most helpful post of the week
    Thought someone would like that.
    Wb reverse light by-pass.jpg
    BO6 = Rarer then a Sandman

  9. #9
    Leadfoot
    Join Date
    Mar 2011
    Location
    Dubbo
    Posts
    97
    I know this is an old thread but it seems like it would be good to keep this all together...

    What parts are needed and what body modifications are needed to fit these lights?

    Cheers
    Black WB bodied HZ panelvan with a 400 chev called Frankie :nerviness:

    Aquarious HX windowless Kingswood project.

  10. #10
    P Plater
    Join Date
    Oct 2016
    Location
    Avenel
    Posts
    31
    What size diodes do I need to do this , I looked at Jaycar and there is lots of different ones.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dash Lights
    By Kiwivan in forum Electrical
    Replies: 5
    Last Post: 16-03-2015, 05:15 PM
  2. No tail lights or interior lights or brake lights
    By b-rock-05 in forum The Lounge
    Replies: 9
    Last Post: 10-11-2014, 01:10 AM
  3. HZ tail lights wiring
    By HX76King in forum Electrical
    Replies: 0
    Last Post: 15-06-2012, 02:59 PM
  4. Center cap - lion tail/no tail
    By Rolla in forum Brakes, Wheels & Tyres
    Replies: 32
    Last Post: 20-06-2011, 03:10 PM
  5. WTB -WB rear lights
    By agr071 in forum Archive
    Replies: 8
    Last Post: 16-05-2011, 08:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •