Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: My Faithful HQ Panel Van

  1. #11
    Learner Driver
    Join Date
    Apr 2011
    Location
    Bendigo Victoria
    Posts
    14
    Thanks for the warm welcome, everyone.
    You're right, the paintwork is in unbelievably good condition.
    I was very lucky that the previous owner was a paint and decorator, as well as a classic car collector himself. He knew that value of protecting paintwork, and although the van was his daily drive for 27 years it was always garaged or under a carport when not in use.

    You mention the Overlander chassis - is that the original 4wd conversion done by a fella in Tasmania (Launceston?), or just a 2wd wheels/tyres/clearance mod?

    You've really got me thinking about whether to respray or not. I like the Idea of "survivor van", considering that 95 % of the paintwork is intact. Maybe rust repair and a good touch-up spray is the way to go.

    Goodness knows, there's plenty of more deserving areas I could work on (eg weather strip replacement (they literally crumble between you fingers) as well as body mount and suspension rubbers, not to mention doing up the gearbox and clutch

    Whatever transpires the colour won't be changing - I love it too,(that's why I bought that colour !!)

    Oh, and I'm already bidding on those ebay seats...

    Mmm.... got some more thinking to do...

    Cheers

    Bruce
    Last edited by barbadosGreen; 13-04-2011 at 11:36 PM. Reason: Forgot an item

  2. #12
    Banned
    Join Date
    Feb 2010
    Location
    Central West NSW
    Posts
    4,463
    If its as good as it looks paintwise, just fix the rust I reckon for sure!

    Overlanders were done by Arther Haywood in Tassie. They are the standard chassis modified to fit a dana front and rear axle. They used a transfer case attached to a turbo 400 transmision.

    I am amazed at where you took your van all those years ago, and just goes to show how addicted to 4wd cars we have become, when a 2wd would mostly do the same job!

  3. #13
    It's a rockin' Robbo's Avatar
    Join Date
    Mar 2010
    Location
    Sunshine Coast
    Posts
    1,572
    Welcome Bruce, that is an amazing story, and wonderful the fact you were able to be reunited with it once again. All the best to you in bringing it up to standard again. "Holden commercial vehicles" and how versatile they are, backed up by documented and photographic evidence. That say's it all really.
    "Proud To Be An Old Fart".

  4. #14
    It's a rockin' playwme's Avatar
    Join Date
    Apr 2010
    Posts
    1,935
    Quote Originally Posted by barbadosGreen View Post

    You mention the Overlander chassis - is that the original 4wd conversion done by a fella in Tasmania (Launceston?), or just a 2wd wheels/tyres/clearance mod?


    Cheers

    Bruce
    Either/or. Obviously a full Arthur Hayward style conversion may be costly but a clearance mod and a diff with electric locker and some chunky tyres would probably do the job. I'm assuming that 36 years on you may not be as willing to do some of those things you had to in order to get out of muddy rutted areas so a few helpful mods may make it easier. Electric winches front and rear may be a saving grace as well. Even put in a V8/auto conversion onto the other chassis and take an offroad camper trailer with you. Then when the trips done drop the body back onto the original chassis with the 173/3 on the tree and you've got the original van back.

    That would really make people oh and ah if for every photo you had in the album from the 70's, you had another in similar location from now.

  5. #15
    Sandman Guru
    Join Date
    Jul 2010
    Posts
    6,451
    GQ Patrol chassis would be the go nowadays. That way it is still a Q. One might call it a GHQ. 80 series cruiser chassis would be even easier as no need for a transfer case lever.

  6. #16
    Cruiser GNW1974's Avatar
    Join Date
    Feb 2011
    Location
    Adelaide Hills SA
    Posts
    260
    Quote Originally Posted by barbadosGreen View Post
    My van isn't a Sandman, just a stock standard Sept 74 HQ van, and I've joined your forum to gather more info about the particular model.

    Shortened version of my story is:

    Van purchased new in 1974.
    Traded in on another vehicle in 1984
    Set out to track the van down in Nov 2010.
    Found it in Dec 2010.
    Now own it again after 28 years.

    You can find the whole story at:

    http://majesticvanners.forumotion.co...self-here#9324
    http://majesticvanners.forumotion.co...l-hq-panel-van
    http://majesticvanners.forumotion.co...l-hq-panel-van
    http://majesticvanners.forumotion.co...ormation#13307

    I plan to restore the van (as much as possible) to its original showroom condition, even to the extent of replacing the 202 engine that is in it currently, with a 173 which is how I purchased it.

    What is proving difficult is obtaining an original pair of bucket seats for the van - I've seen a couple of one-piece backs (tombstone) which were in the early HQs, but I read somewhere that looming changes to ADRs forced GMH to offer adjustable headrests later on in the HQ production.
    These adjustable headrest versions with the painted plywood backs are the ones I'm after.
    It doesn't matter what condition the upholstery is in - I've already got a local guy lined up re-upholster them.

    Cheers

    Bruce
    Great story Bruce, what was the final part of the story, the site won't let me on and I don't want to register just to read it as I have no need to be a user of the site going forward

    regards Graham

  7. #17
    Learner Driver
    Join Date
    Apr 2011
    Location
    Bendigo Victoria
    Posts
    14
    Graham,

    You've read most of the story to date, the Barbados Green Beauty is carefully tucked up in a car cover under the carport until the next half of the story - the Restoration - begins.

    A few milestones have to be reached and decisions made before the last half of the story can proceed, viz:

    1. Complete the patio that I promised my wife before the van came on the scene.
    2. Extend/Enclose the carport to give more layout space, especially when the body comes off the chassis.
    3. Decide whether to go for a full bare metal respray, or just a rub-down and respray specific areas with a final cut and polish. (see other posts on this thread
    4. Decide how "deep" to go in returning it to its "showroom" condition, as this could mean removal of the replacement 202 engine (installed by the previous owner after the original 173 gave up after approx 300,000km) and re-installation of a 173 motor, which was how I purchased it.
    etc.
    etc..

    One significant goal that has been reached was the securing of the original registration plates. The originals (LYJ 334) were surrendered by the previous owner when he replaced them with a personalized set. The original rego number then "lapsed" in the Vicroads system for 28 years until I came along and requested that they be reactivated (For no less that $295 !!) They are perfect replicas of the original black and white plates.

    So that's where I'm up to so, Graham, why not register with the MV forum and you can follow the projects... I registered with mySandman for similar reasons and there's no cost.

    Cheers

    Bruce
    Last edited by barbadosGreen; 14-04-2011 at 09:55 PM.

  8. #18
    Sandman Driver ambientgoat's Avatar
    Join Date
    Mar 2010
    Posts
    516
    What a fantastic thread.
    To see so much of its life as an offroad vechile then a tradies van and still look so fantastic. That really is a credit to you and the second owner.

    Personally I would vote to keep the original paint, I think it tells more of a story that way.

  9. #19
    Learner Driver
    Join Date
    Apr 2011
    Location
    Bendigo Victoria
    Posts
    14
    I won those Penrith seats on Ebay last night - cost me $365 in the end.

    http://cgi.ebay.com.au/ws/eBayISAPI....#ht_500wt_1156

    Thanks for the tip.

    Cheers

    Bruce
    Last edited by barbadosGreen; 23-04-2011 at 11:49 AM.

  10. #20
    Sandman Driver Rico's Avatar
    Join Date
    May 2011
    Location
    Benalla Victoria
    Posts
    519
    What a story Bruce! Thats some great history there! Good luck with the ressurection! Barbados green is one of my favorite Holden colours also! Look forward to watching it progress.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WB Panel Van Replace L/H side panel
    By hargs in forum Paint & Panel
    Replies: 2
    Last Post: 28-11-2014, 12:24 AM
  2. Complete windowless side panel cut outs to replace window panel
    By HX Bordeaux Met Sandman in forum The Lounge
    Replies: 2
    Last Post: 07-04-2013, 06:49 AM
  3. what is my panel van
    By gregwindon in forum HZ Sandman
    Replies: 7
    Last Post: 06-06-2012, 09:35 PM
  4. WTB: HJ-HZ ute/panel van- SA
    By hulkamania in forum Archive
    Replies: 2
    Last Post: 16-03-2012, 07:43 PM
  5. HJ Panel van cut down to ute
    By digger in forum HJ Sandman
    Replies: 6
    Last Post: 15-01-2012, 02:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •